-
DS18B20数字温度传感器实验
实验器材:
探索者STM32F4开发板
实验目的:
学习DS18B20数字温度传感器的使用.
硬件资源:
1,DS0(连接在PF9)
2,串口1(波特率:115200,PA9/PA10连接在板载USB转串口芯片CH340上面)
3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过FSMC驱动,FSMC_NE4接LCD片选/A6接RS)
4,DS18B20传感器一个(接在PG9上).
实验现象:
本实验开机的时候先检测是否有DS18B20存在，如果没有，则提示错误。只有在检测到DS18B20之后才开始
读取温度并显示在LCD上，如果发现了DS18B20，则程序每隔100ms左右读取一次数据，并把温度显示在LCD
上。同样我们也是用DS0来指示程序正在运行。(Experimental equipment:
Explorer STM32F4 development board
Objective:
Learn the use of DS18B20 digital temperature sensor.
Hardware resources:
1, DS0 (connected to PF9)
2, serial port 1 (baud rate: 115200, PA9/PA10 connection on board USB to serial port chip CH340).
3 inch TFTLCD ALIENTEK, 2.8/3.5/4.3/7 module (via FSMC driver, FSMC_NE4 LCD chip select /A6 RS)
4, one of the DS18B20 sensors (attached to PG9).
Experimental phenomena:
This experiment first detects whether there is DS18B20 when starting up. If not, it prompts errors. Only after the detection of DS18B20 did it begin
Read the temperature and display it on LCD. If DS18B20 is found, the program reads data once every 100ms or so and displays the temperature at LCD.
On. Similarly, we also use DS0 to indicate that the program is running.)
- 2018-04-06 15:54:39下载
- 积分：1
-
Cascades
rtghioiopgf,opaetupe4cowtuewrywertgestr
- 2017-09-06 16:08:48下载
- 积分：1
-
FRFT read me,frft,frftcld,testfrct,testfrft
快速离散分数傅里叶变换，采样型、特征分解型、一维、二维等(digital fractional fourier transform)
- 2019-06-06 19:57:28下载
- 积分：1
-
Good genetic algorithm source code c++ language
很好的遗传算法源代码，基于c++语言开发，可以运行,-Good genetic algorithm source code c++ language-based development, can run,
- 2022-05-28 08:19:36下载
- 积分：1
-
游戏代码，， 。，， ，，
dephi平台
游戏代码，， 。，， ，，
dephi平台-game code. Little dephi platform.
- 2022-11-08 06:45:03下载
- 积分：1
-
Delphi MouseHook鼠标钩子
Delphi MouseHook鼠标钩子，全局映像文件, 如果没有TMappingMem, hook就只对本进程起作用，子类TMouseHook, 只提供事件接口实现，关键所在, 通过AllocateHWnd创建一个不可见的窗体, 来实现所有消息的中转，通过TMouseHookBase的WndProc来实现对消息的响应，最终并附有测试项目的源码。
- 2023-05-03 15:00:03下载
- 积分：1
-
10MW风力机叶片设计及其在随机风载荷下的响应分析
说明： 对大型风力机柔性叶片的设计方法及其在随机风载荷作用下的动态响应与载荷特性进行了研究。根据风力
机叶片空气动力学和结构设计理论，将柔性叶片离散为多个刚体，形成一个多体系统。根据多体动力学的建模方法
和叶片气动模型，考虑两者的相互作用，建立了柔性叶片的非线性耦合动力学方程并开发了相应的仿真程序。算例
分析了叶片在随机风载荷作用下的气弹载荷与随机振动响应，并对稳定风速和紊流风速下的响应结果作了对比分析(This paper presented a design method of the flexible blade and its dynamic response under random wind. The
flexible blade was discretized into multiple rigid bodies, and the multi-body system was established according to the theory
of aerodynamics and the structural design of the blade. The nonlinear aeroelastic coupling equations of a constrained
flexible blade are derived by the dynamics of multi-body system theory and the blade aerodynamics model, and the
simulation program was developed. The examples analyzed time-domain responses of the blade under stable and turbulent
wind speed, and the results were compared under these two kinds of wind speed.)
- 2020-01-06 11:22:01下载
- 积分：1
-
sang
包括最后计算压缩图像的峰值信噪比和压缩效果的源码,包括 MUSIC算法，ESPRIT算法 ROOT-MUSIC算法，DSmT证据推理的组合公式计算函数。( Including the final calculation of the compressed image peak signal to noise ratio and compression of the source, Including the MUSIC algorithm, ESPRIT algorithm ROOT-MUSIC algorithm, Combination formula DSmT evidence reasoning calculation function.)
- 2017-04-12 01:51:25下载
- 积分：1
-
transformer
说明： 使用simulink实现变压器的仿真生成的C代码(C code generated by transformer simulation using Simulink)
- 2019-04-03 11:05:31下载
- 积分：1
-
VB icom控件例程，比较详细，可以参考
VB icom控件例程，比较详细，可以参考-VB icom control routines, in more detail, you can refer to
- 2022-07-09 23:28:34下载
- 积分：1
