-
RS485_connection_process-for-C51
在51单片机上实现RS485通讯，能够实现与上位机的通信(RS485 mode on 51 single, able to communicate with the host computer)
- 2014-08-21 18:10:03下载
- 积分：1
-
Motor-Control
能够实现通过红外遥控器控制电机的正反，停止转动。(Can be achieved through an infrared remote control motor forward and reverse, stop turning.)
- 2014-05-31 10:10:58下载
- 积分：1
-
UART
ARM串口应用例子，适用于NXP23系列CPU,封闭式总线，采用内部FLASH及RAM.(ARM serial port application example for NXP23 series CPU, closed-end bus, using the internal FLASH and RAM.)
- 2009-12-27 15:23:16下载
- 积分：1
-
INDUCTION_COOKER
电磁炉 4位单片机汇编 单片机开发4位机器软件 (mcu INDUCTION_COOKER 4bit)
- 2012-06-28 23:10:16下载
- 积分：1
-
1303
单片机驱动的OLED显示屏，单色绿光。C语言(Single-chip-driven OLED display, monochrome green. C language)
- 2008-12-21 21:01:57下载
- 积分：1
-
80c52
基于单片机控制I/O 和模拟电压线性输出，用于基本系统控制(failed to translate)
- 2013-05-06 15:12:22下载
- 积分：1
-
AD_DMA
研华数据采集的一个的demo文件，很好用，可以作为里程看，也可以作为现场采集数据的一个简单程序(Advantech data acquisition a demo file, very easy to use, you can see as mileage, can also be used as the data collected at the scene of a simple progra)
- 2020-09-10 11:08:01下载
- 积分：1
-
19.fengmingqi
此为51单片机的正弦波产生c程序，可将hex文件烧录到单片机内使用。(This is a 51 microcontroller sine wave generator c program, you can burn the hex file into the MCU.)
- 2015-10-16 16:16:04下载
- 积分：1
-
NRF24L01P--51-avr
NRF24L01Information Program(NRF24L01 Information Program)
- 2014-03-17 15:34:46下载
- 积分：1
-
CT
说明： 双路输出控制器”具有信号输出时间设定、 输出信号占空比调整、 当前输出通道及时
间显示、系统工作参数存储、串口通讯及 LED 指示等功能。 “双路输出控制器”通过串口完
成信号输出时间设定功能；通过 EEPROM 完成系统工作参数存储功能；通过按键完成输出通
道切换、 输出信号占空比调整及停止信号输出功能； 系统硬件电路主要由 MCU 控制单元、独
立按键、 LCD 显示单元、 串口通讯单元、 EEPROM 数据存储单元和 LED 指示单元组成(Dual output controller has the signal output time setting, adjust the duty cycle of the output signal, the current output channel in time
Between display, system operating parameters are stored, serial communications and LED indicator. Dual Output Controller through serial END
A signal output time setting function complete system operating parameters via EEPROM memory function complete output pass through the key
Channel switching, adjust the duty cycle of the output signal and the stop signal output function the system hardware circuit is mainly controlled by the MCU unit, alone
Li buttons, LCD display unit, serial communication unit, EEPROM data storage unit and LED indication units)
- 2015-03-10 20:14:34下载
- 积分：1
