-
energydetection
This folder contains several codes which are about energy detector.
- 2010-10-19 01:20:34下载
- 积分：1
-
scrc-filter
说明： 用matlab实现升余弦滤波器，完整的matlab程序代码。(Raised cosine filter with matlab implementation, complete matlab code.)
- 2011-04-10 22:23:15下载
- 积分：1
-
Gaussian-eliminat
高斯消元法MATLAB实现，小报告形式展现(Gaussian elimination MATLAB implementation)
- 2013-10-14 17:06:12下载
- 积分：1
-
RandomWalks
用MATLAB中SDE框架实现各维度的随机步走(In this demo we use the SDE framework in the Econometrics Toolbox to implement various random walks. )
- 2013-10-24 09:29:51下载
- 积分：1
-
项目4
说明： 任务：设计一个4×2.5Gbit/s 长距离光纤传输系统，并利用OptiSystem 仿真验证。
要求：
1．采用波分复用技术，波长设置以100GHz 为间隔，频率分别为193.1THz、193.2THz、193.3THz、193.4THz，每个波长传输速率为2.5Gbit/s（NRZ），传输距离为300km。采用常规光纤，光纤损耗系数为0.25dB/km。
2．单通道光发送机最大输出功率为0dBm，光接收机的接收光功率不低于－26dBm，过载点为－10dBm。
3．可以采用EDFA 作为线路放大器，其中EDFA 的输入功率限制在－18～2dBm，最大输出功率20dBm，增益范围为13～25dB，噪声指数4.0dB。(Task: Design a 4 x 2.5 Gbit/s long-distance optical fiber transmission system, and use OptiSystem simulation to verify.
Requirement:
1. Using wavelength division multiplexing technology, the wavelength is set at 100GHz intervals, with frequencies of 193.1 THz, 193.2 THz, 193.3 THz and 193.4 THz, respectively. The transmission rate of each wavelength is 2.5 Gbit/s (NRZ), and the transmission distance is 300 km. The loss coefficient of conventional optical fibers is 0.25dB/km.
2. The maximum output power of a single-channel optical transmitter is 0 dBm, and the receiving power of an optical receiver is not less than -26 dBm, and the overload point is -10 dBm.
3. EDFA can be used as line amplifier, where the input power of EDFA is limited to - 18-2dBm, the maximum output power is 20dBm, the gain range is 13-25dB, and the noise index is 4.0dB.)
- 2019-05-13 09:39:41下载
- 积分：1
-
zhaosuiji
研究生公共课应用随机过程中的随机模型建立matlab源代码(Graduate Public Course random random process model matlab source code
)
- 2010-12-24 09:34:28下载
- 积分：1
-
Matlab-control-system
Matlab控制系统与应用实例源代码，很全的程序哦(Matlab control system)
- 2011-11-17 22:19:48下载
- 积分：1
-
Codificacion
Interfaz Grafica en matlab
- 2009-11-05 13:15:23下载
- 积分：1
-
teste_com_2
A simple test of RS232 communication between a computer and a surgical light dimmer
- 2014-01-15 21:33:52下载
- 积分：1
-
666777
说明： 基于matlab的数据处理，其中包含了9个振动信号的处理代码。(Matlab-based data processing, which includes nine vibration signal handling code.)
- 2009-08-28 15:25:30下载
- 积分：1
