登录
首页 » Visual C++ » jisuanqi

jisuanqi

于 2011-08-31 发布 文件大小:85KB
0 252
下载积分: 1 下载次数: 12

代码说明:

  单片机计算机设计,实现加减乘除,包括小数点的运算,用的是4*4的键盘(Single chip computer design, realization add, subtract, multiply and divide, including the operations of the decimal point, with 4* 4 is the keyboard)

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • Proteus_PWM_Boost_circuit
    proteus仿真,以LPC2138芯片为核心生成PWM波,控制升压斩波电路(PWM),实现稳定的高电压输出。包含AD转换、串口通信。(proteus simulation. This design use PWM wave generated by LPC2138 to control boost circuit and realized a steady high voltage output. ADC and serial port communication are involved in the design.)
    2021-04-06 23:19:02下载
    积分:1
  • LCD12864
    基于keil 51的LCD12864驱动开发程序,工程文件已建好,可以直接使用(Based keil 51 of LCD12864 driver development program, project files have been built, can be used directly)
    2013-06-05 13:17:40下载
    积分:1
  • ds1302
    程序是DS1302做的电子时钟,内部有DS1302的datasheet和具体的程序(Program is the DS1302 doing electronic clock within the DS1302 datasheet and specific program)
    2013-03-06 16:58:17下载
    积分:1
  • ADAMS_Car
    通过isight-fd集成adams的动力学仿真能力,将模型中的某些属性作为优化变量,通过对adams仿真结果的分析,来对这些属性进行优化(By isight-fd dynamics simulation capabilities integrated adams will model some of the attributes as optimization variables by adams simulation analysis to optimize these attributes)
    2021-02-15 12:49:48下载
    积分:1
  • CT
    说明:  双路输出控制器”具有信号输出时间设定、 输出信号占空比调整、 当前输出通道及时 间显示、系统工作参数存储、串口通讯及 LED 指示等功能。 “双路输出控制器”通过串口完 成信号输出时间设定功能;通过 EEPROM 完成系统工作参数存储功能;通过按键完成输出通 道切换、 输出信号占空比调整及停止信号输出功能; 系统硬件电路主要由 MCU 控制单元、独 立按键、 LCD 显示单元、 串口通讯单元、 EEPROM 数据存储单元和 LED 指示单元组成(Dual output controller has the signal output time setting, adjust the duty cycle of the output signal, the current output channel in time Between display, system operating parameters are stored, serial communications and LED indicator. Dual Output Controller through serial END A signal output time setting function complete system operating parameters via EEPROM memory function complete output pass through the key Channel switching, adjust the duty cycle of the output signal and the stop signal output function the system hardware circuit is mainly controlled by the MCU unit, alone Li buttons, LCD display unit, serial communication unit, EEPROM data storage unit and LED indication units)
    2015-03-10 20:14:34下载
    积分:1
  • ReadthechipID
    读取芯片ID 读取stc单片机的内部唯一码工具 绝对实用 (Stc read the chip ID read the only code within the microcontroller is absolutely useful tool)
    2010-12-14 10:50:30下载
    积分:1
  • SCM-papers-report
    单片机论文报告 我的课程设计报告 供大家参考(SCM papers report my curriculum design report for your reference)
    2013-09-10 19:33:25下载
    积分:1
  • F500_Flash_Test
    C8051f500 Flash读写擦除操作(C8051f500 Flash read and write erase operation)
    2012-06-26 14:32:01下载
    积分:1
  • firework_program
    此程序例子是以C语言编写的一种实现烟花音乐效果的程序(The fire_work program example is written in C language to achieve a fireworks music program)
    2017-03-14 14:30:07下载
    积分:1
  • 110kv
    根据设计任务书的要求,本次设计为110kV 变电站电气一次部分初步设计,并绘 制电气主接线图及其他图纸。该变电站设有两台主变压器,站内主接线分为110kV、 35kV 和10kV 三个电压等级。各个电压等级分别采用单母线分段接线、单母线分段带 旁母接线和单母线分段接线(From the guide of engineering design assignment, we have to design primary power-system of 110kV substation and draw main electrical one-line diagram and others. There are two main transformer in the substation in which main electrical connection can be divided into three voltage grades: 110kV, 35kV with 10kV.It deposits sectionalized single bus bar scheme, sectionalized single and transfer bus bar and sectionalized single bus bar scheme per grade.)
    2020-11-01 11:49:54下载
    积分:1
  • 696516资源总数
  • 106562会员总数
  • 4今日下载