-
code-BL
卢湖川论文显著性检测的源码，利用引导学习进行显著性检测，64位操作系统上可以跑通(Lake Lu Chuan paper saliency detection source, use the guide to learn the significance testing can be run through a 64-bit operating system)
- 2016-06-12 14:31:13下载
- 积分：1
-
pplot
smith
圆图的MATLAB实现，大家看看吧(of MATLAB, we look at it)
- 2006-06-19 19:50:22下载
- 积分：1
-
Pressure
说明： 利用Freeman链码实现圆形物体的检测(Freeman chain code to use to achieve the detection of circular objects)
- 2009-07-27 13:11:14下载
- 积分：1
-
fft0
用fft算法求信号函数的相位或相位差，发现一些规律，对正弦、余弦函数而言，所得结果，有差异( a simulationg of using fft algorithm measuring phase and some problems)
- 2013-08-03 13:50:18下载
- 积分：1
-
mm
说明： 研究生阶段项目资料，论述基于DSP的变频电源(n the postgraduate stage, we discuss the frequency conversion power supply based on DSP.)
- 2018-03-31 09:37:03下载
- 积分：1
-
23825728MIMOcapacity
大规模MIMO信道容量仿真，研究毫米波预编码的可以相互探讨(Massive MIMO capacity)
- 2018-06-14 08:09:32下载
- 积分：1
-
OFDM-BPSK
OFDM BPSK 仿真 (OFDM BPSK simulation)
- 2020-10-05 15:57:39下载
- 积分：1
-
stepmotor
基于STM32的步进电机的驱动控制 经过测试成功控制(Based on the STM32 stepper motor drive control has been tested successfully controlled)
- 2011-08-05 16:59:18下载
- 积分：1
-
Lab405-lcd
1．EMIF 接口
TMS320F28335DSP 的扩展存储器接口(EMIF)用来与大多数外围设备进行连接，典型应用
如
连接片外扩展存储器等。这一接口提供地址连线、数据连线和一组控制线。ICETEK–F28335-A
将这些扩展线引到了板上的扩展插座上供扩展使用。
2．液晶显示模块的访问、控制是由28335ADSP 对扩展接口的操作完成。
控制口的寻址：命令控制接口的地址为 0x208001，数据控制接口的地址为0x208003 和
0x208004，辅助控制接口的地址为0x208002。
3．显示控制方法：
-液晶显示模块中有两片显示缓冲存储器，分别对应屏幕显示的象素，向其中写入数值将改
变显示，写入“1”则显示一点，写入“0”则不显示。(The 1.EMIF interface
Extended TMS320F28335DSP memory interface (EMIF) is used to connect with the most peripheral equipment, typical application
Such as
The connecting piece of extended memory. This interface provides the address lines, data lines and a set of control line. ICETEK- F28335-A
The extension line to the extension socket for plate on the expansion of the use of.
2 liquid crystal display module access, control by the 28335ADSP to the extended interface operation is complete.
Addressing control port: Command and control interface address 0x208001, the address data control interface for 0x208003 and
0x208004, auxiliary control interface address for 0x208002.
3 display control method:
- liquid crystal display module with two display buffer memory, respectively corresponding screen pixel, writing values will be changed to the
Change display, write "1" shows a little, write "0" are not displayed.)
- 2021-03-29 22:09:10下载
- 积分：1
-
sir
一个sir建模的matlab程序。希望对大家有用(one sir modeling programm written by matlab, hope for everyone using)
- 2009-07-10 17:29:41下载
- 积分：1
