-
8QAM
利用Matlab仿真软件，完成如图1所示的一个基本的数字通信系统。信号源产生0、1等概分布的随机信号，映射到16QAM的星座图上，同时一路信号已经被分成了实部和虚部，后边的处理建立在这两路信号的基础上。实部、虚部信号分别经过平方根升余弦滤波器，再加入高斯白噪声，然后通过匹配滤波器（平方根升余弦滤波器）。最后经过采样，判决，得到0、1信号，同原信号进行比较，给出16QAM数字系统的误码。(Using Matlab simulation software, as shown in Figure 1 to complete a basic digital communications systems. Signal source such as arise over the distribution of 0,1 random signal, is mapped to 16QAM constellation diagram, at the same time all the way the signal has been divided into real and imaginary parts, behind the deal with the establishment of these two signals in the basis. Real part, imaginary part of the signal, respectively, after a square root raised cosine filter, then add white Gaussian noise, and then through the matched filter (square root raised cosine filter). Finally, after sampling, the verdict has been 0,1 signal, to compare with the original signal is given 16QAM digital system error.)
- 2007-10-22 15:57:50下载
- 积分：1
-
STEEP
一个最速下降的开发, matlab的代码示例。希望对大家有所帮助(steepest descent)
- 2009-06-05 16:16:04下载
- 积分：1
-
speed-control-system-simulation
AC and DC speed control system simulation
- 2013-03-27 14:00:50下载
- 积分：1
-
PSOR5
ANN using PSO coding
- 2012-01-19 19:17:43下载
- 积分：1
-
ejdlbkzqfzsj
说明： 二级倒立摆控制器的仿真与设计 ，matlab(Double inverted pendulum controller simulation and design, matlab)
- 2021-03-09 16:09:27下载
- 积分：1
-
rematlabofdmpaper
PAPR REDUCTION TECHNIQUES FOR OFDM USING PTS AND SLM
- 2014-11-24 10:10:03下载
- 积分：1
-
turbo
turbo码的编码与译码，交织器
coding and decoding of turbo, interleaver(coding and decoding of turbo, interleaver, almost regular permutation)
- 2013-12-08 20:58:20下载
- 积分：1
-
BoardingTime
2007 MCM B 计算登机时间程序(自己编的matlab代码)(2007 MCM B calculate the boarding time)
- 2012-02-05 23:13:06下载
- 积分：1
-
Navigation
机器人的全部目标是产生一个实验室的引导路线。实验室里的各种不同方向坐标已经存储，并且机器人在不同方向移动的非常成功。在某一方向，它可以给出该方向的位置。在不同方位的移动，机器人需要几个阶段，首先定位在某一位置，接着计算下一个方向的路程。(The overall goal of the robot is to conduct a guided tour of the laboratory. Coordinates of various stations in the room are stored, and the robot moves successively from station to station. At each station, it gives an explanation of that station. To move between stations, the robot make several steps, localizing itself at each step and recalculating the way to the next station)
- 2009-05-04 10:22:22下载
- 积分：1
-
ant
蚁群聚类算法，较好的实现了带聚类数据的聚类，已知了聚类数目。(ant conoly clustering)
- 2010-01-04 16:17:23下载
- 积分：1
