登录
首页 » TEXT » rmtrc

rmtrc

于 2011-11-07 发布 文件大小:3KB
0 163
下载积分: 1 下载次数: 5

代码说明:

  使用PIC16F877 picc编译环境做的红外遥控接收程序(Environment using the PIC16F877 picc compiler to do infrared remote control receiver)

文件列表:

rmtrc.c,10330,2011-11-07

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • LCD_UART_ADC_GSM_GPIO
    Embedded C code for Lpc2148 interface with ADC,LCD,GSM,GPIO and UART for Transformer control and monitoring system
    2016-06-08 17:23:34下载
    积分:1
  • Digital-Temperature-Sensor
    DS18B20 单线数字温度传感器,即“一线器件”,其具有独特的优点:采用单总线的接口方式 与微处理器连接时 仅需要一条口线即可实现微处理器与 DS18B20 的双向通讯。 ( DS18B20-wire digital temperature sensor, that is, first-line devices, it has unique advantages: Only one port line interface mode when using a single bus connection can be realized with a microprocessor of the microprocessor and DS18B20)
    2016-05-07 22:34:39下载
    积分:1
  • 3通道120°相位差方波
    0.2通道180°相位差方波,3通道120°相位差方波,4通道90°相位差方波 1.试验平台stm32f103c8t6 2.2通道用定时器3的1、2通道;3通道用定时器3的1、2、3通道;4通道用定时器3的1、2、3、4通道; 3.实现方法,周期和占空比用捕获通道中断反复修改捕获值来实现 4.相位差采用定时器的生效同步规则来实现(下一次更新时间生效)(0.2 channel 180 degree phase difference square wave, 3 channel 120 degree phase difference square wave and 4 channel 90 degree phase difference square wave 1. Test platform stm32f103c8t6 2.2 channels use 1, 2 channels of timer 3; 3 channels use 1, 2, 3 channels of timer 3; 4 channels use 1, 2, 3, 4 channels of timer 3; 3. Realization method, period and duty cycle are realized by repeatedly modifying capture value with capture channel interrupt 4. The phase difference is realized by the effective synchronization rule of the timer (the next update time takes effect))
    2020-06-24 06:00:02下载
    积分:1
  • JN-AN-1194
    说明:  returns the device state
    2020-06-21 18:20:02下载
    积分:1
  • 485MODBUS
    用STM32做从机,PC机做主机的MODBUS多机通信实验。内附简单的使用说明(MODBUS slave EXP。PC use to master and MCU use to slave.)
    2020-12-01 15:39:26下载
    积分:1
  • STM32-USART-send-and-receive-data-
    本程序目的是提供使用stm32串口收发一帧数据的一种方法,采用中断方式接受和发送,每进一次中断接收或发送一字节,可以实现pc机与板子通信或板子与板子间通信。注意本程序中外接高速晶振为12M赫兹,而大部分板子为8M赫兹,本程序所用芯片是stm32RBT6(The purpose of this procedure is to provide a method of using STM32 serial port to send and receive a data, using interrupt mode to receive and send, every one into the time interrupt receiving or sending a byte, can realize PC and the communication or board and board communication. Note that this procedure the external high-speed crystal oscillator for the 12M Hz, while the majority of board is 8M Hz, the chip used in this procedure is stm32RBT6)
    2020-07-31 10:18:38下载
    积分:1
  • stm32f407 ucGUI port
    说明:  stm32f407 ucGUI port
    2019-05-28 08:28:55下载
    积分:1
  • 1602-static-display-program
    stc系列单片机系统与1602液晶静态显示程序(1602 static display program)
    2013-12-17 09:43:19下载
    积分:1
  • PWM输出
    使用STM32F103 32位芯片配置定时器以及控制定时器输出PWM波形(Using STM32F103 32 bit chip to configure timer and control the output PWM waveform of timer)
    2020-06-23 16:00:01下载
    积分:1
  • 0_1背包问题
    说明:  一维数组实现01背包问题和完全背包问题的C语言解,注释清楚(C Language Annotation of 01 Knapsack Problem and Complete Knapsack Problem for One-Dimensional Array with Clear Annotations)
    2020-06-23 10:20:02下载
    积分:1
  • 696516资源总数
  • 106741会员总数
  • 17今日下载