登录
首页 » Others » display_driver

display_driver

于 2012-09-15 发布 文件大小:906KB
0 128
下载积分: 1 下载次数: 32

代码说明:

  SSD1963 is a display controller of 1215K byte frame buffer to support up to 864 x 480 x 24bit graphics content. It also equips parallel MCU interfaces in different bus width to receive graphics data and command from MCU. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel.

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • vusb-20121206
    V-USB firmware for AVR controllers
    2013-03-03 08:11:46下载
    积分:1
  • 微型气象站
    平台为arduino uno r3,采集温湿度,气压、海拔、土壤湿度信息在5110屏幕上显示,并通过nrf24l01传到另外一个arduino采集板上,然后通过串口传给pc机。传感器有ds18b20,dht11,土壤湿度传感器,bmp085,显示屏为5110,一对nrf24l01。library文件夹下为所需的各种库。(The platform for Arduino uno R3, collecting temperature and humidity, air pressure, altitude, soil moisture information displayed in the 5110 screen, and through the nRF24L01 to another Arduino acquisition board, then transferred to the PC through the serial port. The sensor has DS18B20, DHT11, soil humidity sensor, bmp085, display screen is 5110, a pair of nrf24l01.Library folder is required for various libraries.)
    2017-11-15 20:24:27下载
    积分:1
  • pads
    pads 布等长线 (cloth pads and other long-term)
    2010-05-10 11:37:08下载
    积分:1
  • STC_UART_GPS_OK
    芯片:STC12C5A60S2 晶振:16MHz 波特率:4800bps 引脚定义:串行口1: 发送————TxD/P3.1; 接收————RxD/P3.0 串行口2: 发送————TxD2/P1.3;接收————RxD2/P1.2 功能描述:STC12双串口通信(中断方式) 当串行口1接收GPS数据后(4800波特率),将此数据由串行口2发送出去 当串行口2接收数据后,将此数据由串行口1发送出去(Chip: STC12C5A60S2 Crystal: 16MHz Baud Rate: 4800bps Pin definitions: Serial port 1: Send TxD/P3.1 receiving RxD/P3.0 Serial port 2: Send TxD2/P1.3 receiving RxD2/P1.2 Function Description: STC12 Two serial communication (interrupt) When a serial port after receiving GPS data (4800 baud), this data is sent out by the serial port 2 When the serial port 2 receives data, this data is sent out by the serial port 1 )
    2020-11-06 08:29:49下载
    积分:1
  • Keil.LPC1700_DFP.2.3.0
    芯片库,支持keil环境下搭建NXP系列lpc17xx芯片(Chip library, supporting keil environment to build NXP series lpc17xx chips)
    2020-12-19 15:09:10下载
    积分:1
  • STM32超声波
    STM32f103ZET6控制超声波测距模块,通过串口显示(STM32f103ZET6 controls the ultrasonic ranging module, which is displayed through serial port.)
    2019-05-17 10:00:25下载
    积分:1
  • 19.PWM直流电仿真实验
    说明:  使用protuce对直流电机进行仿真,仿真程序在压缩文件里(Using protuce to simulate DC moto)
    2020-06-25 20:40:01下载
    积分:1
  • dds
    实现单片机对DDS控制,通过键盘输入频率,并通过LCD显示。(failed to translate)
    2013-05-05 15:44:45下载
    积分:1
  • MAXplusqiangda
    MAXplus抢答器课程设计做了很久的验证通过(MAXplus Responder course design a long time ago passed the test)
    2007-05-04 23:46:30下载
    积分:1
  • I2cInInterrupt
    PIC16F727在中断进行I2c器件读写,接口简单,工作稳定,附详细注释,绝对模块化设计,甚至可以直接添到你的程序里用,51单片机稍作修改也可使用。(The PIC16F727 I2c devices to read and write in the interrupt interface is simple, stable, with detailed notes, the absolute modular design and can even add to your program with 51 single-chip slight modifications can also be used.)
    2012-04-30 09:46:38下载
    积分:1
  • 696518资源总数
  • 105877会员总数
  • 14今日下载