-
matlabimage3
MATLAB图象处理的一些函数,大家分享(MATLAB some image processing function, we share)
- 2007-02-01 22:58:35下载
- 积分：1
-
ex3epipolar
used for image processing in matlab
- 2012-10-17 15:00:49下载
- 积分：1
-
optipid
现有的PID参数优化方法往往难以同时兼顾系统对快速性、稳定性与鲁棒性的要求，本文针对这一缺陷，提出了一种多目标PID优化设计方法——在满足系统的鲁棒性的前提下，以超调量、上升时间和调整时间最小作为多目标优化的子目标，并将NSGA-Ⅱ与PGA相结合对其求解。该算法求得的Pareto最优解分布均匀，收敛性和鲁棒性好，决策者可根据实际系统的要求在Pareto解集中选择最终的满意解，这为快速性、稳定性与鲁棒性的权衡分析提供了有效的工具。仿真结果表明本文设计方法的有效性和优越性。()
- 2008-03-22 13:45:38下载
- 积分：1
-
gmdhbuild
GMDH的MATLAB源代码，是主程序，也就是gmdhbuild.文件。与之配套的测试文件gmdhtest.m、输出误差gmdhpredice.m会接着发出。(GMDH The MATLAB source code, is the main program, which is gmdhbuild. File. Accompanying test file gmdhtest.m, output error will be followed by a gmdhpredice.m.)
- 2010-01-22 11:09:09下载
- 积分：1
-
IIR
买原创力YCL2812开发板时，赠送的源程序，适合做数字信号处理的朋友参考，谢谢！
(Buy originality YCL2812 development board, the gift of the source, suitable for digital signal processing reference to a friend, thank you!)
- 2011-04-28 15:52:39下载
- 积分：1
-
PIDcontorl
this is machine mechanism in PID control of Motor whit zero-impulse used in matlab, draw freq fig.
- 2014-08-27 10:52:58下载
- 积分：1
-
duoxiangjiegou
基于多相结构的信道化发射机实信号输出matlab仿真程序:从仿真得到的图可以看到，输出8路实信号所需的带宽为输出8路复信号所需带宽的一半。另外，输出的复信号频谱结构不再像直接法实现时所得到的顺序对应结构，其原因还有待进一步研究。(Channel based on multi-phase structure of real signal of the transmitter output matlab simulation program: graph obtained from the simulation can be seen, the output 8-channel bandwidth needed for real signals, the output 8-channel half the bandwidth required for complex signals. In addition, the output structure of the complex signal spectrum is no longer realized as the direct method corresponds to the order obtained by the structure, the reason remains to be further studied.)
- 2009-09-08 22:26:49下载
- 积分：1
-
IMM
采用多模方式的卡尔曼滤波程序，仿真对运动目标的跟踪(Using multi-mode approach of Kalman filtering process, simulation of moving target tracking)
- 2007-08-13 00:00:39下载
- 积分：1
-
guasMATLAB
In numerical linear algebra, the Gauss–Seidel method, also known as the Liebmann method or the method of successive displacement, is an iterative method used to solve a linear system of equations. It is named after the German mathematicians Carl Friedrich Gauss and Philipp Ludwig von Seidel, and is similar to the Jacobi method. Though it can be applied to any matrix with non-zero elements on the diagonals, convergence is only guaranteed if the matrix is either diagonally dominant, or symmetric and positive definite.
- 2011-05-11 11:48:44下载
- 积分：1
-
mCAP_pre_SISO
m-CAP pre-equalization for visible light communication
- 2018-08-29 15:03:20下载
- 积分：1
