登录
首页 » LabView » caijifenxiqi

caijifenxiqi

于 2013-11-11 发布 文件大小:33KB
0 141
下载积分: 1 下载次数: 11

代码说明:

  七、 虚拟信号采集分析器 1):利用信号发生器产生不同信号(信号的相关参数可调) 2):在信号上叠加白噪声。 3):对上述信号进行采样(采样频率可调) 4):在采样的过程中利用均值滤波(每三个点取均值) 5):显示采样后的波形,并对其进行频率分析。 6):将采样后的波形与原波形做比较(在同一坐标系中显示) (Seven, the virtual signal acquisition Analyzer 1): different signals generated by the signal generator (signal correlation parameters adjustable) 2): white noise superimposed on the signal. 3): the said signal is sampled (sampling frequency adjustable) 4): In the process of sampling using the mean filter (averaging three points each) 5): Show the sampled waveform and its frequency analysis. 6): the sampled waveform is compared with the original waveform (shown in the same coordinate system))

文件列表:

caijifenxiqi.vi,38748,2013-11-11

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • keil-for-arm-MDK5.11A
    keil 5.11a专业版注册机 (通用版) 破解工具,可以破解专业版,已亲手实验。(keil 5.11a crack tool, you can crack the professional version, has personally experiment.)
    2014-07-23 09:58:41下载
    积分:1
  • 例程10 TFT LCD显示实验
    本实验利用STM32F407开发板连接TFTLCD模块,实现TFTLCD模块的显示,下载成功后,通过把LCD模块插入TFTLCD模块接口,按下复位之后,就可以看到LCD模块不停的显示一些信息并不断切换底色。同时该实验会显示LCD驱动器的ID,并且会在串口打印(按复位一次,打印一次)。(This experiment uses STM32F407 development board to connect TFTLCD module to realize the display of TFTLCD module. After downloading successfully, by inserting the LCD module into the interface of TFTLCD module, after pressing reset, we can see that the LCD module keeps displaying some information and changing the background color. At the same time, the experiment will display the ID of the LCD driver and print it on the serial port (press reset once, print once).)
    2018-11-12 16:51:04下载
    积分:1
  • PID(v1.0.0)
    说明:  内有PID源码驱动,包含位置式PID和增量式PID。PID通过结构体定义,可同时定义多套参数,并同时使用,并不会相互影响。(There is a PID source driver, including position PID and incremental PID.PID through the structure definition, can be defined at the same time multiple sets of parameters, and use at the same time, will not affect each other.)
    2019-03-26 16:19:36下载
    积分:1
  • ModbusSlaveProgram
    这是一款模拟modbus从机的程序,可以方便用户调试modbus程序,本程序完全免费。(This is a simulation of the modbus from machines, can facilitate users to debug the modbus program, this program is completely free. )
    2013-11-08 19:23:47下载
    积分:1
  • 7336_PDF_C04
    Power Electronic Devices Handbook part 4
    2009-05-22 18:01:54下载
    积分:1
  • ds18b20
    系列语音温度控制器适用于别墅、公寓、办公楼及工业商业等,用于控制中央空调、水采暖、电采暖的恒温控制,达到调节室内温度保持恒温及舒适节能的目的。(The series voice temperature controller suitable for villas, apartments, office buildings and industrial commercial, used to control central air conditioning, water heating, electric heating thermostat control, reach adjust the indoor temperature to maintain constant temperature and comfort energy saving purposes)
    2013-03-02 10:36:48下载
    积分:1
  • IEC61131-3(2003)
    说明:  国外标准IEC6116-3工业自动化的编制(discripe the international standard)
    2009-07-29 09:53:08下载
    积分:1
  • OV7670-Hardware-Guide
    OV7670照相模组 硬件应用指南文件只能给那些获得OmniVision Technologies, Inc. 批准的员工、 组织、团体使用。OmniVision公司机密 Table of Contents 1. OV7670 模组参考设计 注 1.PWDN和RESET不用时,应接地 2. OV7670 模组接口参考设计 2.1 引脚定义 2.2 电源供给 3. OV7670 照相模组操作 3.1 节电模式 3.2 照相模组工作在不断电的节电模式 3.2.1 上电,硬件复位 3.2.2 上电,软件复位 3.2.3 由不断电的节电模式恢复工作 3.2.4 不断电的节电模式 3.3 照相模组工作在断电的节电模式 3.3.1 上电 3.3.2 打开摄像头 , 硬件复位 3.3.3 打开摄像头, 软件复位 3.4关闭摄像头 4.SCCB总线共享 5.手机上PCB 设计时序的考虑 5.1 PCLK采样 5.2 用 EMI/ESD 器件 6. 硬件检测 6.1 检查硬件设计 6.1.1 模组功能 6.1.2 检查手机 Camera 接口 6.2 检查Camera 模组是否工作 6.3 检查SCCB 6.4 检查照相模组接口 6.5常见问题 6.6 图片方向 6.6.1 摄像头4:3, LCD 3:4 6.6.2 摄像头3:4, LCD 6.7 检查颜色 6.8 检测图像中心(OV7670 camera module Hardware Application Guide)
    2012-12-18 02:32:06下载
    积分:1
  • PN532_nfc_lib
    PN532的上位机软件库,包括应用说明文档(PN532 PC software libraries, including the application documentation)
    2015-04-15 16:08:44下载
    积分:1
  • CoapBlip
    无线传感器网络tinyos仿真实例CoapBlip源代码文件(Wireless sensor network simulation example tinyos CoapBlip source code files)
    2015-07-10 16:12:05下载
    积分:1
  • 696518资源总数
  • 105559会员总数
  • 1今日下载