-
electirc-ICC
16路电流采集卡程序
可实现同时对16路电流模拟输入转换成16路数字信号输出,AD采用ltc1865,8选1模拟通道开关采和CD4051，主机采用应答方试（一问一答）.(16 current acquisition card procedures can be achieved at the same time on the 16 current analog input into digital signal 16 output, AD used ltc1865, 8-channel analog switch election adopt 1 and CD4051, the host response to the use of test (a question-and-answer).)
- 2009-06-08 15:23:51下载
- 积分：1
-
SOC计算部分代码解析
BMS的SOC（荷点状态）计算部分代码解析(Source analysis of SOC computing in BMS)
- 2018-05-02 10:49:42下载
- 积分：1
-
LED_PMD
单片机初学入门程序,不停地循环显示数字0~9。(Beginners Introduction to SCM process, a continuous loop display numbers 0 to 9.)
- 2008-07-27 15:07:13下载
- 积分：1
-
REMOTE
PIC16F877A+LFN红外接送头+8位led，超简单的原理做红外实验，保证看了就懂，自主研发的哦！不用在看复杂的原理了(PIC16F877A+ LFN head+ 8 bits infrared shuttle led, the principle of infrared super easy to do the experiment, ensure that saw you ll understand, independent research and development! Don t look at the complex principle)
- 2012-02-07 17:52:21下载
- 积分：1
-
（FIFO）串口接收和发送
使用stm32的串口实现fifo队列缓冲读写数据，值得新手学习(Using STM32 serial port to realize FIFO queue buffer read and write data, it is worth learning by novice.)
- 2021-04-08 14:09:00下载
- 积分：1
-
TM1638共阳显示
说明： 使用TM1638驱动共阳数码管显示，Keil4工程(Using tm1638 to drive the display of common positive nixie tube)
- 2021-03-02 14:19:34下载
- 积分：1
-
AD
说明： ADC0832进行AD转换,使用通道0.采集后存入RAM(ADC0832 for AD conversion, the use of channel 0. Collected and deposited into the RAM)
- 2008-05-16 16:01:17下载
- 积分：1
-
STM32-control-CC1101
STM32控制CC1101发送接收的源代码，可通过串口调试工具查看接收到的数据。(STM32 control CC1101 transmit and receive the source code, can be received through the serial port debugging tool to view the data.)
- 2020-11-09 11:19:47下载
- 积分：1
-
51单片机数码管显示0-9
说明： 使用 AT89C52 单片机开发，功能是1个数据管，显示0 至 9。(Developed with AT89C52 single chip computer, the function is a data tube, displaying 0 to 9.)
- 2019-01-27 10:02:57下载
- 积分：1
-
111
步进电机驱动，微处理器为S3C2410，具有调节转速功能(Stepper motor drive, microprocessor S3C2410, adjust the speed function with)
- 2011-05-21 21:36:05下载
- 积分：1
