-
stm32f407 ucGUI port
stm32f407 ucGUI port
- 2019-05-28 08:28:55下载
- 积分：1
-
Tracker_VBAT
这是我做的一个跟踪器的锂电池关锁的部分。(This is what I do as a tracker of lithium shut part.)
- 2011-07-21 16:01:17下载
- 积分：1
-
xiaoche
一个转来的小车运动源程序 (Transferred to a source of car movement)
- 2007-08-19 17:04:32下载
- 积分：1
-
4、液晶显示器
说明： 这是基于开发板LPC1114的源码程序，是用C语言编写，关于液晶显示屏的配置和实现同时它也是一个完整的模板，可以在此基础上添加其他程序用于开发板的学习，是一个完整的模板，可直接使用。(This is based on the development board LPC1114 source code program, is written in C language, on the LCD display configuration and implementation at the same time it is a complete template, you can add other programs on this basis for the development board learning, is a complete template, can be used directly.)
- 2020-06-22 17:40:02下载
- 积分：1
-
ADC1_DMA
说明： STM32F103中的adc采样，实现DMA的adc采样，不占用CPU(STM32F10 series of ADC sampling source code to achieve ADC conversion up to 12bit precision)
- 2020-05-20 18:33:38下载
- 积分：1
-
AT24C02
说明： 单片机中IIC总线的应用，AT24C02的一个基本例子(IIC bus, microcomputer application, AT24C02 is a basic example of)
- 2010-03-31 12:51:28下载
- 积分：1
-
BOOST
三相交错式DC/DC的BOOSR电路，适合初学者学习(Phase Interleaved DC/DC circuit of BOOSR, suitable for beginners to learn)
- 2013-07-24 09:30:12下载
- 积分：1
-
rectangles
Test code for TFT 3.5 LCD touchscreen for Arduino UNO
- 2014-07-22 01:30:28下载
- 积分：1
-
按键 步进电机
步进电机是将电脉冲信号转变为角位移或线位移的开环控制电机，是现代数字程序控制系统中的主要执行元件，应用极为广泛。。在非超载的情况下，电机的转速、停止的位置只取决于脉冲信号的频率和脉冲数，而不受负载变化的影响，当步进驱动器接收到一个脉冲信号，它就驱动步进电机按设定的方向转动一个固定的角度，称为“步距角”，它的旋转是以固定的角度一步一步运行的。可以通过控制脉冲个数来控制角位移量，从而达到准确定位的目的；同时可以通过控制脉冲频率来控制电机转动的速度和加速度，从而达到调速的目的。(Stepper motor is an open loop control motor which transforms electrical pulse signal into angular displacement or linear displacement. It is the main executive element in modern digital control system, and is widely applied. In the case of non overloaded, the motor speed and stop position depends only on the pulse frequency and pulse number, regardless of load changes, when the stepper driver receives a pulse signal, it drives stepper motor to set the direction of rotation of a fixed angle, called "step", it is the rotation of the fixed point of the operation step by step. We can control the angular displacement by controlling the number of pulses, so as to achieve the goal of accurate positioning. At the same time, we can control the speed and acceleration of motor rotation by controlling the pulse frequency, so as to achieve the purpose of speed regulation.)
- 2018-01-29 13:24:17下载
- 积分：1
-
EWSTM8
说明： IAR for stm8编译环境和配置参考模板(IAR for stm8 Compilation environment and configuration reference template)
- 2020-06-18 11:20:02下载
- 积分：1
