-
Proteus_PWM_Boost_circuit
proteus仿真，以LPC2138芯片为核心生成PWM波，控制升压斩波电路（PWM），实现稳定的高电压输出。包含AD转换、串口通信。(proteus simulation. This design use PWM wave generated by LPC2138 to control boost circuit and realized a steady high voltage output. ADC and serial port communication are involved in the design.)
- 2021-04-06 23:19:02下载
- 积分：1
-
11
说明： NUAA微机实验课设：1.密码确认。2.数据采集控制系统。3.数码管显示(NUAA Computer Lab located: a password confirmation. 2 Data acquisition and control system. 3 digital display)
- 2014-01-16 23:02:47下载
- 积分：1
-
demo
交流电动机的矢量控制（Transvector Contrl）理论，从理论上解决了交流电动机转矩的高性能控制问题。其基本思想是在普通的三相交流电动机上设法模拟直流电动机转矩控制的规律，在磁场定向坐标上，将电流矢量分解成产生磁通的励磁电流分量 和产生转矩的转矩电流分量 ，并使两分量互相垂直，彼此独立，然后分别进行调节。这样，交流电动机的转矩控制，从原理和特性上就与直流电动机相似了。因此，矢量控制的关键仍是对电流矢量的幅值和空间位置的控制。(AC motor vector control (Transvector Contrl) theory, control theory to solve the problem of high-performance AC motor torque. The basic idea is to try to simulate the DC motor torque control law in the ordinary three-phase AC electric motor in field-oriented coordinates, the current vector decomposed to produce the excitation current component of the magnetic flux generating a torque current component and torque, and two components perpendicular to each other, independently of each other, and then were adjusted. Thus, AC motor torque control, the principle and characteristics of the DC motor on and similar. Therefore, the key vector control is still the amplitude and spatial position of the current vector control.)
- 2016-12-01 08:58:29下载
- 积分：1
-
PSCAD-Relay
PSCAD继电保护仿真模型 (PSCAD simulation examples Collection)
- 2011-07-03 09:19:57下载
- 积分：1
-
hal timer 32k
可以用指令控制选择信道，设置发射功率，发送数据包（长度可选），接收数据包（接收时延可设），CC2430复位,内部温度传感器读取，定时器时长控制。底层函数基本做好，如果要加入新功能，可自行更改。(You can select the channel with the command control, set the transmit power, transmit data packet (lengths), receive data packets (receiver delay can be set), CC2430 reset, the internal temperature sensor reading, the timer duration control. Basic underlying function well, if you want to add new features to make changes.)
- 2011-06-22 18:57:46下载
- 积分：1
-
ieee14
IEEE14节点模型，PSCAD案例，同步发电机功率60MW，电压等级230kV(IEEE14 node model, PSCAD case, synchronous generator power 60MW, the voltage level of 230kV)
- 2015-03-18 14:54:44下载
- 积分：1
-
integrated-control
双步进电机综合控制 用于51单片机 (Dual stepper motor integrated control)
- 2013-07-22 15:02:12下载
- 积分：1
-
jianpan
单片机实验中的键盘扫描实验，用lcd1602液晶显示屏显示按键值，c语言编写(for 51)
- 2015-04-06 13:33:00下载
- 积分：1
-
sourse
基于单片机的数控开关电源设计，带仿真和详细程序。(NC-based single-chip switching power supply design, with simulation and detailed procedures.)
- 2009-04-26 14:30:34下载
- 积分：1
-
Automatic-traffic-control-system-
自动交通控制系统用红、绿、黄三支共两组发光二极管表示交通信号灯，利用单片机模拟有时间显示的定时交通信号灯控制管理。信号灯的变化规律可如下：
1）放行线：绿灯亮放行25秒，黄灯亮警告5秒，然后红灯亮禁止。
2）禁示线：红灯亮禁止30秒，然后绿灯亮放行。
3）当某一方向的红灯亮时，若该方向有车通过，则用扬声器声报警。（撞红灯信号可用3-5V模拟量表示）(Automatic traffic control system using red, green, yellow light-emitting diodes, said a total of three traffic lights, the use of single-chip analog time display on a regular traffic signal control and management. Changes of lights to be as follows: 1) Release Line: green clearance 25 seconds, the yellow light warning for 5 seconds, then the red light is prohibited. 2) ban shows lines: the red light is prohibited for 30 seconds, then the green light to release. 3) When the red light in one direction, if the direction of the car through, the alarm speaker sound. (Hit the red signal available 3-5V analog representation))
- 2013-12-19 18:26:11下载
- 积分：1
