-
copy-to-SD-Card
Keil C Cortex m3 programming SD card
- 2014-01-08 16:08:00下载
- 积分：1
-
usingAT89S51controlrelaytest
说明： 磁保持继电器通断测试程序，采用AT89S51控制。(Magnetic self-perpetuating relay-off test procedure, using AT89S51 control.)
- 2009-08-20 08:52:30下载
- 积分：1
-
180度舵机
说明： 180度舵机可以由按键控制，缓慢转180度(The 180 degree steering gear can be controlled by keys and rotates 180 degrees slowly)
- 2020-06-19 10:40:02下载
- 积分：1
-
ICDEV2478_Ucgui(LCDPSDRAM)
基于NXP LPC2478的uCGUI例程，实现LCD和SDRAM的测试(uCGUI based on NXP LPC2478，include LCD and SDRAM test)
- 2014-01-23 10:00:15下载
- 积分：1
-
ST-link相关资料资料
使用STM32F103C8T6作为主控的ST-Link固件(ST-Link firmware using STM32F103C8T6 as master control)
- 2020-06-21 18:20:02下载
- 积分：1
-
0103
采用STM407实现摄像头OV2640获取图片数据，通过TCP网络上传显示。图片1024*768的时候，能实现每秒3帧左右的传输，速度还可以。直接工程文件。(The video data of the camera OV2640 is obtained by STM407, and the display is uploaded through the TCP network. Image 1024*768, can achieve about 3 frames per second transmission, the speed is still available. Direct engineering documents.)
- 2020-11-04 09:19:53下载
- 积分：1
-
C61F187-datasheet
奥利生的一款单片机数据手册，和PIC16F887兼容！可使用汇编，c语言！(Orly students a microcontroller data sheet and PIC16F887 compatible! Can use assembler, c language!)
- 2012-11-23 09:59:28下载
- 积分：1
-
shiyan2PCA0_8Bit_PWM_Output
C8051F410单片机PWM输出，控制电机的启动；停止(C8051F410 microcontroller PWM output, control motor start-up stop)
- 2013-05-17 09:46:05下载
- 积分：1
-
用C语言编写STM32嵌入式程序 万年历 LCD
说明： 用C语言编写STM32嵌入式程序，设计一个万年历系统，并用HX1230屏显示相关的时间信息。
基本要求：
1.C语言程序要求是模块化设计。
2.该万年历要求能显示时间（时、分、秒）、年月日及闹钟定时时间（分、秒）。
3.该系统由2-3个按键可调整显示的时间、年月日及闹钟定时时间，具体各个按键功能及编程方式自定。
4.该闹钟可以定时时间到，LED将发出提示闪光，且持续30s。
5.HX1230屏能驱动显示。
6.定时时间可被打断，即打断后恢复时继续计时。
7.设置闹钟报警功能；
8.利用STM32自带的温度传感器功能，使系统能显示当前环境温度值。(STM32 embedded program is written in C language, a calendar system is designed, and relevant time information is displayed on HX1230 screen.
Basic requirements:
1. The requirement of C language program is modular design.
The calendar requires that time (hours, minutes, seconds), year, month, day and alarm clock timing time (minutes, seconds) be displayed.
3. The system can adjust the display time, year, month, day and alarm clock timing time by 2-3 keys, and the function and programming mode of each key are self-determined.
4. The alarm clock can be scheduled to arrive, and the LED will give a prompt to flash, and lasts for 30 seconds.
5. HX1230 screen can drive display.
6. Timing time can be interrupted, i.e. when the interruption is resumed, the timing will continue.
7. Setting alarm function of alarm clock;
8. Using the temperature sensor function of STM32, the system can display the current environmental temperature)
- 2020-06-25 05:00:02下载
- 积分：1
-
STM32
实现电子钟功能 ，可设置闹钟，有闹铃，可设置时间和闹钟时间(Implement electronic clock function, can set the alarm clock, alarm clock, can be set up time and clock time)
- 2015-07-19 13:05:31下载
- 积分：1
