-
jiaotongdeng
单片机模拟交通灯显示。其中，红灯与绿灯显示时间均为50s，中间的黄灯显示时间为15s。绿灯用八位发光二极管流动闪烁作代表；红灯用八位发光二极管全亮作代表；黄灯用八位发光二极管全亮全灭闪烁作代表。刚开始显示的为绿灯。(SCM simulated traffic light display. Among them, the red and green display times are 50s, in the middle of the yellow light is displayed for 15s. Green with eight light-emitting diode flashes as a representative flow red with eight full brightness light-emitting diodes as a representative yellow with eight light-emitting diodes for all light flashes Quanmie representatives. Just beginning to show as green. Display order: green- yellow- red- yellow- green- yellow- red- ..................)
- 2014-05-29 17:15:44下载
- 积分：1
-
IOaUART
利用单片机IO口模拟UART程序,系统用了一个定时器和一个外部中断,外部中断主要是用来检测串口起始位的到来。(IO mouth simulation UART program, microcontroller system with a timer and an external interrupt, external interrupt is mainly used to detect the arrival of the start bit serial port.)
- 2016-12-30 08:38:34下载
- 积分：1
-
android-change-with-cPP
Android代码调用C++代码和C++代码调用Android代码 (Android code call C++ code and C++ code called Android code)
- 2011-11-08 15:01:13下载
- 积分：1
-
I2C_IO_simulate
使用IO口模拟I2C时序，包括主机、从机时序。(Using IO port simulation I2C timing, including the host, the machine timing.)
- 2015-09-06 16:47:35下载
- 积分：1
-
Document
电场，考虑电导率，电流密度矢量关系式变化关系(Electric field, considering the electric conductivity, the current density variation of the relation vector)
- 2014-04-02 14:10:01下载
- 积分：1
-
CT
说明： 双路输出控制器”具有信号输出时间设定、 输出信号占空比调整、 当前输出通道及时
间显示、系统工作参数存储、串口通讯及 LED 指示等功能。 “双路输出控制器”通过串口完
成信号输出时间设定功能；通过 EEPROM 完成系统工作参数存储功能；通过按键完成输出通
道切换、 输出信号占空比调整及停止信号输出功能； 系统硬件电路主要由 MCU 控制单元、独
立按键、 LCD 显示单元、 串口通讯单元、 EEPROM 数据存储单元和 LED 指示单元组成(Dual output controller has the signal output time setting, adjust the duty cycle of the output signal, the current output channel in time
Between display, system operating parameters are stored, serial communications and LED indicator. Dual Output Controller through serial END
A signal output time setting function complete system operating parameters via EEPROM memory function complete output pass through the key
Channel switching, adjust the duty cycle of the output signal and the stop signal output function the system hardware circuit is mainly controlled by the MCU unit, alone
Li buttons, LCD display unit, serial communication unit, EEPROM data storage unit and LED indication units)
- 2015-03-10 20:14:34下载
- 积分：1
-
CH341A-Labview-driver-VI.lib
I2C与mens传感器通信应用ch341-I2C-labview(I2C and mens tongxin)
- 2015-07-23 11:29:21下载
- 积分：1
-
MultiThreadADO
MultiThread DB - ADO CMTDaoDatabase CMTDaoRecordset
- 2013-12-25 01:26:16下载
- 积分：1
-
MSP-EXP430FR5739-User-Experience
MSP430实现的多级菜单功能，采用OLED实现，占用Ram量较少(MSP430 realize multi-level menu functions, the use of OLED achieved occupancy of less Ram)
- 2013-07-23 18:46:18下载
- 积分：1
-
CardTool-
ACR38智能读卡器测试用：芯片IC卡等(ACR38 Smart Card Reader test: IC card, etc.)
- 2020-12-04 08:49:25下载
- 积分：1
