-
MSP-EXP430F5529原理图
说明： 这是msp exp430f5529的原理图(This is the schematic diagram of MSP exp430f5529)
- 2020-06-20 19:40:02下载
- 积分：1
-
GPS数据解析
用12864加STC12C5A60S2做的GPS解析(GPS Analysis with 12864 and STC12C5A60S2)
- 2020-06-20 10:00:01下载
- 积分：1
-
TM-28-initial-code-V0.1
ST7789S-G4A的初始化代码，该IC能够零电容实现2.8寸TFT屏驱动(ST7789S-G4A initialization code, the IC can achieve zero capacitance drive 2.8 inch TFT screen)
- 2021-04-09 15:28:59下载
- 积分：1
-
clockDS1302
该源程序的功能是设计一个时钟，时钟精度还可以，这是单片机学习的一个进阶吧，掌握了它，也算是对单片机有比较熟练的应用了，加油(The source function is to design a clock, clock accuracy can be, this is an advanced single-chip learning it, grasp it, can be considered a relatively skilled microcontroller applications, the refueling)
- 2014-05-26 11:18:41下载
- 积分：1
-
sanjiaobo
51单片机中利用PCF8591进行D/A转换在示波器中显示三角波(51 MCU PCF8591 using the D/A converter in the oscilloscope display triangular wave)
- 2013-07-10 16:49:03下载
- 积分：1
-
code
基于51单片机两相四线步进电机驱动程序，本程序可用42，57系列步进电机，工作方式为八拍。(Based on 51 single-chip two phase four line stepping motor driver, this program can use 42, 57 series of stepper motor, working mode is eight.)
- 2018-03-26 15:48:01下载
- 积分：1
-
1.8TFT
实现1.8寸tft彩屏的驱动，能够显示字符，汉字，以及图片。(Achieve 1.8-inch tft color screen driver, can display characters, characters, and images.)
- 2020-06-28 18:40:02下载
- 积分：1
-
atcmd
GSM模块AT命令组装和AT命令响应解析程序。实现了自动组装标准AT命令并发送到GSM模块，同时可以提取GSM模块输出的所有AT命令，同时实现了大量AT命令响应的解析工作。主要的过程采用了Contiki的进程模型。(Making and parsing routine for AT commands of GSM module. It can automatically make standard AT commands and sent it to GSM module, while it can get all the AT commands sending GSM module, and analysis a large number of AT command responses. The main process uses a process model of Contiki.)
- 2020-11-23 15:59:33下载
- 积分：1
-
四轴飞行器代码
采用STM32F103开发的一款简易四旋翼无人机飞控及遥控代码，适合想做无人机的同学研究借鉴。(A simple four rotor UAV flight control and remote control code developed by STM32F103 is suitable for students who want to do UAV research and use for reference.)
- 2018-06-27 11:06:34下载
- 积分：1
-
labview-danpianji
利用Keil C51 和LabVIEW编写程序实现PC与单片机串口通信。
设计任务
PC通过串行口将数字（00 ，01 ，02，03... ，FF，十六进制）发送给单片机，单片机收到
后回传这个数字，PC接收到回传数据后显示出来，若发送的数据和接收到的数据相等，则串
行通信正确，否则有错误。启始符是数字00，结束符是数字 FF。(Use Keil C51 and LabVIEW programming to achieve PC serial communication with microcontroller. Displayed after the PC via the serial port design task digital (00, 01, 02,03 ..., FF, hex) is sent to the microcontroller, the microcontroller receives return this figure, PC receives the return data , if the data sent and received data are equal, the serial communication is correct, otherwise an error. Startup character is a number 00, the end of the character is a number FF.)
- 2020-07-01 04:20:01下载
- 积分：1
