-
240128c
240128液晶驱动的测试程序，c语言编写(240,128 LCD driver testing procedures, c language)
- 2020-11-16 08:59:40下载
- 积分：1
-
virtual-serial-port
单片机虚拟串口仿真图，里面有虚拟串口软件和串口调试助手，还有用proteus进行的仿真图，不用开发板一样进行仿真，只能说proteus太强大了。只要你想不到的，没有他做不到的！(Virtual serial port emulation chip chart, which has a virtual serial port software and serial debugging assistant, as well as performed with proteus simulation map, not the same simulation development board can only say proteus too strong. As long as you think, no he can not do!)
- 2013-07-31 16:19:11下载
- 积分：1
-
10-BLDC-PMSM-pid-speed-control
基于stm32单闭环pid调速控制，单电阻采样，正弦波驱动，pid调速。(Based on stm32 pmsm drive, single sampling resistor, sine wave drive, pid speed control.)
- 2021-04-10 18:58:59下载
- 积分：1
-
string
说明： 斯凯mrp开发用的宽字符转换 很有用的 有个头文string.c 和string.h 头文件里有定义(Sky mrp convert wide character to use for development of a useful article string.c head and string.h header files are defined)
- 2011-04-07 19:48:45下载
- 积分：1
-
res
1664LED红外控制的定时器，可以通过遥控器远程控制时间的加减、暂停等功能。包括红外解码、红外码值处理(1664LED control program，which can be controled by both IR and keys。)
- 2014-06-17 05:29:26下载
- 积分：1
-
PWM
NXP LPC11u24 cortex-M0 PWM 示例程序(NXP LPC11u24 cortex-M0 PWM sample programs)
- 2014-02-11 10:27:56下载
- 积分：1
-
etpu_set1
飞思卡尔单片机的etpu功能模块set1 打包好的 直接可以用(The etpu function module of Freescale MCU Set1 Carle pack can be used directly)
- 2013-12-31 15:15:43下载
- 积分：1
-
Analogmeter
模拟电表软件，主要模拟电表数据、遥测数据、参数修改、报文显示、可以模拟2个电表（可以自行修改增加），最终通过RS232转485输出。。。(Analog meter software, the main analog meter data, telemetry data, parameter modification, message displays, you can simulate two meters (which can be modified to increase its own), the final output through the RS232 switch 485. . .)
- 2021-04-12 22:48:56下载
- 积分：1
-
WASPCN
根据IAPWS-IF97和IFC67编写的水和蒸汽性质计算软件(the software for calculating the properties of water and water vapor)
- 2015-01-31 11:45:07下载
- 积分：1
-
CT
说明： 双路输出控制器”具有信号输出时间设定、 输出信号占空比调整、 当前输出通道及时
间显示、系统工作参数存储、串口通讯及 LED 指示等功能。 “双路输出控制器”通过串口完
成信号输出时间设定功能；通过 EEPROM 完成系统工作参数存储功能；通过按键完成输出通
道切换、 输出信号占空比调整及停止信号输出功能； 系统硬件电路主要由 MCU 控制单元、独
立按键、 LCD 显示单元、 串口通讯单元、 EEPROM 数据存储单元和 LED 指示单元组成(Dual output controller has the signal output time setting, adjust the duty cycle of the output signal, the current output channel in time
Between display, system operating parameters are stored, serial communications and LED indicator. Dual Output Controller through serial END
A signal output time setting function complete system operating parameters via EEPROM memory function complete output pass through the key
Channel switching, adjust the duty cycle of the output signal and the stop signal output function the system hardware circuit is mainly controlled by the MCU unit, alone
Li buttons, LCD display unit, serial communication unit, EEPROM data storage unit and LED indication units)
- 2015-03-10 20:14:34下载
- 积分：1
