-
Simulation_Module_Functions
电机控制的一部分程序 还没有编完 以后陆续上传完整程序(Simulation odule unctions)
- 2012-09-05 15:50:15下载
- 积分：1
-
一种基于LabView的环境监测与预警系统设计
本项目是以 LabVIEW 为开发平台的环境监控与预警系统，实现了对温度，烟雾和电压电流等信号的实时采集、记录、存储和回放等功能程序的模块化设计，从而达到环境监控的目的。(This project is an environmental monitoring and early warning system based on LabVIEW. It realizes the modular design of functions such as real-time acquisition, recording, storage and playback of signals such as temperature, smoke and voltage and current, thus achieving the purpose of environmental monitoring.)
- 2019-05-07 14:05:02下载
- 积分：1
-
LV_UART_WAVEFORM
通过串口读取数据，利用示波器实现波形的显示，同时具有保存数据，回放图形的功能。(Read data through the serial port, use an oscilloscope to achieve waveform display, but also has to save the data, playback graphics.)
- 2021-03-10 14:19:27下载
- 积分：1
-
clock
时钟美化控件，用于实现LabVIEW界面编程中对窗体的美化(The clock to beautify control for LabVIEW programming interface in the form of beautification)
- 2013-03-25 10:37:51下载
- 积分：1
-
Spectrum-Analyzer
基于LabVIEW的频谱分析仪设计，数据采集、参数设置、频谱分析（波形显示、频率测量、功率测量）、数据存储(Spectrum Analyzer Based on LabVIEW design, data collection, parameter setting, spectral analysis (waveform display, frequency measurement, power measurement), data storage)
- 2013-11-06 12:49:57下载
- 积分：1
-
labview-signal
产生0到100kd的方波。正玄波，三角波，锯齿波和输出为0到10V的电压的信号发生器(0 to 100kd produce a square wave. Sine wave, triangle wave, sawtooth wave and the output voltage from 0 to 10V signal generator)
- 2013-07-09 19:39:27下载
- 积分：1
-
16进制转2进制字符串
本程序是用LabVIEW编写的，具体是把16进制转2进制字符串(This procedure is written in LabVIEW, specific is to switch the hexadecimal 2 hexadecimal string)
- 2017-07-22 11:52:31下载
- 积分：1
-
RIGOL
设置电源的电压值的控制程序，可以实现电源的任意给值，和开关控制(Setting the voltage value of the power supply control program, can achieve any of the power supply to the value, and a switch control)
- 2020-08-31 09:28:11下载
- 积分：1
-
GPD-3303
固纬GPD-3303 labview串口通信驱动程序(this is labview driver for GGPD-3303.)
- 2020-11-23 10:19:34下载
- 积分：1
-
示波器测试版1.5
说明： 可以对单次输入的信号进行滤波分析和图像显示。同时也具备暂停和历史图像保存的功能。
本程序主要针对的是低频率的未知信号，对于高频率信号最好采用单次采样的方式。(The single input signal can be filtered and analyzed, and the image can be displayed. It also has the functions of pausing and preserving historical images.
This program is mainly for low frequency unknown signals, for high frequency signals, the best way to use a single sampling.)
- 2020-06-20 09:20:01下载
- 积分：1
