登录
首页 » VHDL » pin_lv1

pin_lv1

于 2010-06-05 发布 文件大小:459KB
0 206
下载积分: 1 下载次数: 2
我要下载

代码说明：

  一个简易的频率计，主要用检测在一定范围内的频率，当然频率过大会有误差(A simple frequency meter, mainly used for testing in a range of frequencies, of course, frequency of errors over the General Assembly)

文件列表：

pin_lv1
.......\buffer.acf,15771,2010-06-01
.......\buffer.fit,12838,2010-06-01
.......\buffer.hex,44370,2010-06-01
.......\buffer.hif,2934,2010-06-01
.......\buffer.mmf,577,2010-06-01
.......\buffer.ndb,4233,2010-06-01
.......\buffer.pin,5795,2010-06-01
.......\buffer.pof,55240,2010-06-01
.......\buffer.rpt,36168,2010-06-01
.......\buffer.scf,4776,2010-05-27
.......\buffer.snf,38356,2010-06-01
.......\buffer.sof,19555,2010-06-01
.......\buffer.sym,746,2010-05-27
.......\buffer.ttf,80279,2010-06-01
.......\buffer.v,461,2010-06-01
.......\dwx.acf,15771,2010-06-01
.......\dwx.fit,15168,2010-06-01
.......\dwx.hex,44370,2010-06-01
.......\dwx.hif,3229,2010-06-01
.......\dwx.mmf,334,2010-06-01
.......\dwx.ndb,11744,2010-06-01
.......\dwx.pin,5792,2010-06-01
.......\dwx.pof,55237,2010-06-01
.......\dwx.rpt,39158,2010-06-01
.......\dwx.snf,43005,2010-06-01
.......\dwx.sof,19555,2010-06-01
.......\dwx.sym,507,2010-05-27
.......\dwx.ttf,80279,2010-06-01
.......\dwx.v,1555,2010-05-27
.......\fp.acf,15771,2010-06-01
.......\fp.fit,8817,2010-06-01
.......\fp.hex,44370,2010-06-01
.......\fp.hif,8604,2010-06-01
.......\fp.mmf,332,2010-06-01
.......\fp.ndb,8359,2010-06-01
.......\fp.pin,5791,2010-06-01
.......\fp.pof,55236,2010-06-01
.......\fp.rpt,33931,2010-06-01
.......\fp.scf,161339,2010-05-27
.......\fp.snf,41309,2010-06-01
.......\fp.sof,19555,2010-06-01
.......\fp.sym,163,2010-05-27
.......\fp.ttf,80279,2010-06-01
.......\fp.v,391,2010-06-01
.......\fp1.acf,15771,2010-06-01
.......\fp1.fit,6886,2010-06-01
.......\fp1.hex,44370,2010-06-01
.......\fp1.hif,6905,2010-06-03
.......\fp1.mmf,334,2010-06-01
.......\fp1.ndb,6631,2010-06-01
.......\fp1.pin,5792,2010-06-01
.......\fp1.pof,55237,2010-06-01
.......\fp1.rpt,29055,2010-06-01
.......\fp1.snf,28485,2010-06-01
.......\fp1.sof,19555,2010-06-01
.......\fp1.sym,196,2010-05-27
.......\fp1.ttf,80279,2010-06-01
.......\fp1.v,445,2010-06-01
.......\js9.acf,15771,2010-06-01
.......\js9.fit,3255,2010-06-01
.......\js9.hex,44370,2010-06-01
.......\js9.hif,4078,2010-06-01
.......\js9.mmf,334,2010-06-01
.......\js9.ndb,2516,2010-06-01
.......\js9.pin,5792,2010-06-01
.......\js9.pof,55237,2010-06-01
.......\js9.rpt,21627,2010-06-01
.......\js9.scf,929,2010-05-27
.......\js9.snf,8960,2010-06-01
.......\js9.sof,19555,2010-06-01
.......\js9.sym,228,2010-05-27
.......\js9.ttf,80279,2010-06-01
.......\js9.v,411,2010-06-01
.......\js99999999.acf,15771,2010-06-01
.......\js99999999.fit,12018,2010-06-01
.......\js99999999.gdf,2947,2010-06-01
.......\js99999999.hex,44370,2010-06-01
.......\js99999999.hif,10827,2010-06-01
.......\js99999999.mmf,348,2010-06-01
.......\js99999999.ndb,17797,2010-06-01
.......\js99999999.pin,5799,2010-06-01
.......\js99999999.pof,55244,2010-06-01
.......\js99999999.rpt,43139,2010-06-01
.......\js99999999.snf,67944,2010-06-01
.......\js99999999.sof,19552,2010-06-01
.......\js99999999.sym,479,2010-05-27
.......\js99999999.ttf,80279,2010-06-01
.......\LIB.DLS,190,2010-06-01
.......\pin_lv.acf,16220,2010-06-01
.......\pin_lv.fit,36762,2010-06-01
.......\pin_lv.gdf,4706,2010-06-01
.......\pin_lv.hex,128470,2010-06-01
.......\pin_lv.hif,18883,2010-06-01
.......\pin_lv.mmf,213,2010-06-01
.......\pin_lv.ndb,44630,2010-06-01
.......\pin_lv.pin,7555,2010-06-01
.......\pin_lv.pof,130949,2010-06-01
.......\pin_lv.rpt,100448,2010-06-01
.......\pin_lv.snf,189965,2010-06-01

下载说明：请别用迅雷下载，失败请重下，重下不扣分！

发表评论

0 个回复

  • DDS
    基于STC12C5A60S2单片机开发的简易波形发生器，包括DDS芯片AD9833，液晶HB12864等源程序，能够产生正弦波、方波、三角波等波形。系统控制采用红外遥控的方式，能够方便的对波形幅度和频率等进行调节。随源码附上调试心得一份。(Simple waveform generator based on STC12C5A60S2 microcontroller development, including DDS chip AD9833, LCD HB12864 and other source, can generate sine wave, Fang Bo, triangle wave, etc.. The system controls the way of infrared remote control, and can adjust the amplitude and frequency of the wave.)
    2015-07-05 14:43:27下载
    积分：1
  • wenduji
    基于学习板的数字温度计设计程序，可以在数码管上动态显示实时温度，按键控制温度范围，可以使用蜂鸣器报警等。(Based on the study of the board, can design program digital thermometer in digital displays real-time temperature on the tube, button control temperature range, can use the buzzer alarm and etc.)
    2010-07-19 17:51:50下载
    积分：1
  • example6_TIM
    本例展示了如何设置TIM，用它来测量一个外部输入信号的频率和占空比。 TIM2时钟设置为72MHz，预分频设置为0，TIM2计数器时钟可表达为： TIM2 counter clock = TIMxCLK / (Prescaler +1) = 72 MHz，因此可测量的最小频率值为1100Hz。 设置TIM2工作在PWM输入模式（PWM Input Mode），把外部信号作为输入连接到TIM2通道2。 利用TIM2计数器中断来测量信号的频率和占空比。在TIM2_IRQHandler中，计算信号的频率和占空比，方法如下： 变量"Frequency"为由下式得到的外部信号频率： Frequency = TIM2 counter clock / TIM2_CCR2 单位Hz 变量"Duty_Cycle"为由下式得到的外部信号占空比： Duty_Cycle = (TIM2_CCR1*100)/(TIM2_CCR2) 单位 (This example shows how to set up the TIM, and use it to measure the frequency and duty cycle of an external input signal. TIM2 clock set to 72MHz and the prescaler is set to 0, TIM2 is counter clock can be expressed as: TIM2 is counter clock = TIMxCLK/(prescaler. Ppls1) = 72 MHz, the minimum measurable frequency value of 1100 Hz. Set TIM2 PWM input mode (PWM Input Mode), the external signal as an input connected to the the TIM2 Channel 2. TIM2 counter interrupt signal to measure frequency and duty cycle. Calculate the frequency and duty cycle of the signal in TIM2_IRQHandler as follows: variable " Frequency" on the grounds of the external signal frequency by the following formula: Frequency = TIM2 is counter clock/TIM2_CCR2 unit Hz variable Duty_Cycle " on the grounds of the following formula to get external duty cycle: Duty_Cycle = (TIM2_CCR1* 100)/(TIM2_CCR2) in )
    2012-05-18 18:28:47下载
    积分：1
  • keyboard
    单片机实验软件之《按键识别》源程序，适用于电子，自控系专业期末答辩可选类型实验(SCM test software is " key identification" source for electronics, professional end of the respondent optional types of Automatic Control experiments)
    2010-05-18 09:00:26下载
    积分：1
  • Freemodbus-For-51
    一个从Freemodbus，移植到c51上的程序(One Freemodbus, transplanted to the program on c51)
    2021-02-03 18:49:58下载
    积分：1
  • Calcul
    汇编语言的计算器的代码，是加减乘除，带小数点的。大家可以用(Calculator assembly language code is Math, with a decimal point. We can)
    2010-07-16 14:52:22下载
    积分：1
  • KEA驱动库
    恩智浦KEA驱动库，代码搬运，可以参考学习，仅供参考。(En Zhipu KEA driver library, code handling, you can refer to learn, for reference only.)
    2019-03-04 22:25:24下载
    积分：1
  • at89c52yaokong
    基于AT89C52的红外遥控学习机，调试成功，多年珍藏，对学习者有帮助(Based on AT89C52 infrared remote learning machine, commissioning successful years of collection and help learners)
    2012-07-23 19:39:46下载
    积分：1
  • caijifenxiqi
    七、 虚拟信号采集分析器 1）：利用信号发生器产生不同信号（信号的相关参数可调） 2）：在信号上叠加白噪声。 3）：对上述信号进行采样（采样频率可调） 4）：在采样的过程中利用均值滤波（每三个点取均值） 5）：显示采样后的波形，并对其进行频率分析。 6）：将采样后的波形与原波形做比较（在同一坐标系中显示） (Seven, the virtual signal acquisition Analyzer 1): different signals generated by the signal generator (signal correlation parameters adjustable) 2): white noise superimposed on the signal. 3): the said signal is sampled (sampling frequency adjustable) 4): In the process of sampling using the mean filter (averaging three points each) 5): Show the sampled waveform and its frequency analysis. 6): the sampled waveform is compared with the original waveform (shown in the same coordinate system))
    2013-11-11 13:38:55下载
    积分：1
  • ADC_DualModeInterleaved
    stm32f4 adc 的代码，双通道，用DMA保存数据。(stm32f4 family c code, adc This example provides a short description of how to use the ADC peripheral to convert a regular channel in Dual interleaved mode using DMA in mode 3 with 5Msps. DMA mode 3 is used in interleaved mode in 6-bit and 8-bit resolutions. The Dual interleaved delay is configured 6 ADC clk cycles. On each DMA request (two data items are available) two bytes representing two ADC-converted data items are transferred as a half word. The data transfer order is similar to that of the DMA mode 2. A DMA request is generated each time 2 data items are available 1st request: ADC_CDR[15:0] = (ADC2_DR[7:0] << 8) | ADC1_DR[7:0] 2nd request: ADC_CDR[15:0] = (ADC2_DR[7:0] << 8) | ADC1_DR[7:0] The ADC1 and ADC2 are configured to convert ADC Channel 12, with conversion triggered by software. By this way, ADC channel 12 is converted each 6 cycles. In this example, the system clock is 168MHz, APB2 =84MHz and ADC clock = APB2 /2. Since ADCCLK=)
    2013-10-14 19:06:26下载
    积分：1
  • 696516资源总数
  • 106658会员总数
  • 16今日下载

热门标签

Visual C++ matlab C/C++ Java Others Unix_Linux EasyLanguage易语言 Visual Basic C# PDF C++ Delphi VHDL ASP WINDOWS
热门下载

Copyright© 2019-2026 | Powered by Imdn | 浙ICP备16007336号 | IMDN交流 | 联系客服（QQ：3324461878）

本网站资源收集自网络及网站用户上传，若有侵权请邮件至（3324461878@qq.com），核实后我们会在24小时内删除，谢谢！