-
数据结构教材中的全部排序算法，结构清楚 很好用的
数据结构教材中的全部排序算法，结构清楚 很好用的-data structure of all materials sorting algorithm, the structure clearly good use
- 2022-04-29 10:24:44下载
- 积分：1
-
Seismic4
地震剖面显示源代码，用QT编写的程序，对地震数据显示感兴趣人员来说，有不错的借鉴意义。(Seismic profiles show the source code, programs written using QT, interested persons on the seismic data, there are a good reference.)
- 2021-01-20 11:08:41下载
- 积分：1
-
CH11-KEA128-SPI
说明： 1. 硬件接线
（1）调试串口(UART_Debug)使用UART2，在“printf.h”文件中宏定义， 对应引脚为TX-PTD7，RX-PTD6
（在“uart.h文件中宏定义）。
（2）灯0~3（LIGHT_0~LIGHT_3）对应的引脚是PTC0~PTC3，高电平点亮（由硬件接法决定）
（3）SPI0_CLK对应的引脚是PTE0， SPI0_MOSI对应的引脚是PTE1，
SPI0_MISO对应的引脚是PTE2，SPI0_PCS对应的引脚是PTE3，
SPI1_CLK对应的引脚是PTG4， SPI1_MOSI对应的引脚是PTG5，
SPI1_MISO对应的引脚是PTG6，SPI1_PCS对应的引脚是PTG7。
（4）SPI0作为master,SPI1作为slave，SPI1接收SPI0发送的数据并产生中断。
用导线将PTE0与PTG4对接，将PTE1与PTG5对接，将PTE2与PTG6对接，将PTE3与PTG7对接。(1. Hardware wiring
(1) Debugging Serial Port (UART_Debug) uses UART2, macro-defined in "printf.h" file, corresponding pins are TX-PTD7, RX-PTD6.
(macro definition in the uart.h file).
(2) The pins corresponding to the lamp 0~3 (LIGHT_0~LIGHT_3) are PTC0~PTC3, and the high-level lighting is determined by the hardware connection.
(3) The pin corresponding to SPI0_CLK is PTE0, and the pin corresponding to SPI0_MOSI is PTE1.
The pin corresponding to SPI0_MISO is PTE2, and the pin corresponding to SPI0_PCS is PTE3.
The pin corresponding to SPI1_CLK is PTG4, and the pin corresponding to SPI1_MOSI is PTG5.
The pin corresponding to SPI1_MISO is PTG6, and the pin corresponding to SPI1_PCS is PTG7.
(4) SPI0 acts as master and SPI1 acts as slave. SPI1 receives data sent by SPI0 and generates interruption.
PTE0 and PTG4 are docked by wire, PTE1 and PTG5 are docked, PTE2 and PTG6 are docked, PTE3 and PTG7 are docked.)
- 2020-06-16 12:00:01下载
- 积分：1
-
CANopen_stack
说明： CAN Open Libraries for Implementation
- 2019-01-11 23:14:11下载
- 积分：1
-
anewunscengedkalmanparticlefilter
一种新的改进的UPF粒子滤波，在不降低精度的同时有效降低了算法的运行时间，很好用，可直接适用(A new particle filter to improve the UPF, achieved without lowering the accuracy of the algorithm at the same time effectively reduce the running time, very good, and can be directly applicable)
- 2008-12-23 15:13:55下载
- 积分：1
-
冈萨雷斯数字图像处理
说明： 冈萨雷斯版数字图像处理matlab源程序及图片(digital image processing)
- 2019-03-24 12:44:14下载
- 积分：1
-
Meldas 500
说明： handbook for users about mitsu meldas 500 cnc
- 2019-03-01 07:47:01下载
- 积分：1
-
jixian
能进行脉搏波的波峰波谷识别，还有一些基线漂移的处理(It can recognize the peak and valley of pulse wave, and process some baseline drift.)
- 2021-05-22 12:30:03下载
- 积分：1
-
LCD1602
基于FPGA的LCD1602驱动，verilog代码，已经调试成功-LCD1602-driven FPGA-based, verilog code debugging has been successful
- 2022-02-15 13:40:12下载
- 积分：1
-
计算湍流相位屏
说明： 分行法实现湍流相位屏，并计算相关参数。具体数值自行调整即可。(thanks for your downlaoding)
- 2021-03-12 16:32:18下载
- 积分：1
