-
STM32F103 GPIO点亮LED灯程序
STM32 的GPIO操作示例程序代码, 试用与Keile环境STM32F103代码(STM32 GPIO operation code)
- 2019-02-27 18:00:42下载
- 积分：1
-
444
实现智能数字显示仪表。要求8位数码管显示（4位显示测量值，4位显示设定值），4输入按钮（功能选择、数码管选择、数字增加、数字减少），可设定上下限报警（蜂鸣器报警）。K型热电偶（镍铬-镍硅），测温范围为0℃~1000℃。采用比例-积分控制、并用晶闸管脉宽调制驱动1000W电加热器（电源电压为AC220V）。(Intelligent digital display instrument. Asked 8-bit digital display (4 shows measured values, four display settings), 4 input buttons (feature selection, the digital control options, the number increased, the number is reduced), upper and lower limits can be set to alarm (buzzer alarm ). K-type thermocouple (Ni-Cr and Ni- Si), temperature range is 0 ℃ ~ 1000 ℃. Proportional- integral control, and using thyristor PWM drive 1000W electric heater (power supply voltage is AC220V).)
- 2021-01-10 22:08:50下载
- 积分：1
-
3通道120°相位差方波
说明： 0.2通道180°相位差方波，3通道120°相位差方波，4通道90°相位差方波
1.试验平台stm32f103c8t6
2.2通道用定时器3的1、2通道；3通道用定时器3的1、2、3通道；4通道用定时器3的1、2、3、4通道；
3.实现方法，周期和占空比用捕获通道中断反复修改捕获值来实现
4.相位差采用定时器的生效同步规则来实现（下一次更新时间生效）(0.2 channel 180 degree phase difference square wave, 3 channel 120 degree phase difference square wave and 4 channel 90 degree phase difference square wave
1. Test platform stm32f103c8t6
2.2 channels use 1, 2 channels of timer 3; 3 channels use 1, 2, 3 channels of timer 3; 4 channels use 1, 2, 3, 4 channels of timer 3;
3. Realization method, period and duty cycle are realized by repeatedly modifying capture value with capture channel interrupt
4. The phase difference is realized by the effective synchronization rule of the timer (the next update time takes effect))
- 2020-06-24 06:00:02下载
- 积分：1
-
HT1621 段码屏驱动
HT1621芯片测试程序,可以依次点亮HT1621寄存器(HT1621 chip test program)
- 2020-06-30 17:00:02下载
- 积分：1
-
遥控避障小车
说明： 实现避障的基础功能，使用stm32f103rct6板子(this is very good idea!)
- 2020-06-15 23:00:02下载
- 积分：1
-
Hi_H.264_DEC_SDK_V2.2.5.0
hi3518 codec,是海思sdk里面的程序，大家可以参考一下，很有用
- 2020-12-17 15:49:12下载
- 积分：1
-
HighPriorityBroadcastReceiver
High Priority Broadcast Receiver extends Result Receiver.
- 2014-02-17 14:33:41下载
- 积分：1
-
sun
基于ARM的俄罗斯方块设计，本次将设计实现一个用C语言编写的、在基于ARM核心的ADuC7020 ARM开发板上实现的单机版的俄罗斯方块小游戏。使用Keil3编程软件对C语言代码进行编写，支持按键操作，在实现过程中涉及了LCD液晶屏的图形显示、按键控制、LED控制、中断、蜂鸣器等嵌入式的编程技术。(Tetris ARM-based design, this will be designed to achieve a C language, the ADuC7020 ARM development board ARM core-based implementations of stand-alone version of the Tetris game. Use Keil3 programming software code written in the C language, support for key operations involved in the implementation process of the LCD screen graphical display, control buttons, LED control, interrupt, buzzer embedded programming techniques.)
- 2014-01-10 11:19:18下载
- 积分：1
-
text - pwm
stm32实现pwm波形输出，脉冲宽度调制(PWM),STM32 F1 TIM4 4通道PWM同时输出(STM32 realizes PWM waveform output, pulse width modulation (PWM), STM32 F1 TIM4 4 channel PWM output at the same time)
- 2019-06-03 16:45:15下载
- 积分：1
-
batterytest
锂电池模型动力锂电池RC等效模型辨识方法双RC模型的搭建(Lithium battery model, power lithium battery, RC equivalent model identification method, double RC model)
- 2017-06-20 10:27:18下载
- 积分：1
