-
改进后的高斯信号发生函数，可用于字符运算。
改进后的高斯信号发生函数，可用于字符运算。-Improved Gaussian signal, can be used for computing characters.
- 2022-01-26 05:12:57下载
- 积分：1
-
OPC development required, OPCFoundation open Boards.
OPC开发必备,OPCFoundation公开的开发套件。-OPC development required, OPCFoundation open Boards.
- 2022-02-03 01:43:25下载
- 积分：1
-
心形流水灯
自己画的板子 程序是修改过的 更方便布线(Self-drawn boards are more convenient wiring with modifications)
- 2020-06-19 22:00:01下载
- 积分：1
-
grey
说明： 灰色系统GM（1,1）模型，用于预测分析，简单易懂，条理清晰(Grey System GM(1,1) Model for Prediction and Analysis, Simple and Clear)
- 2020-06-17 13:20:01下载
- 积分：1
-
NS2 not on the BLUE SFB and the simulation source code.
ns2中没有的关于BLUE和SFB的仿真源码。-NS2 not on the BLUE SFB and the simulation source code.
- 2022-02-02 22:32:35下载
- 积分：1
-
本程序用于测试实时时钟模块SD2000系列功能之一:四种中断功能 程序功能如下： 1.在SD2000试验板上显示实时时间的小时和分钟? 2./INT1 到指定时...
本程序用于测试实时时钟模块SD2000系列功能之一:四种中断功能 程序功能如下： 1.在SD2000试验板上显示实时时间的小时和分钟? 2./INT1 到指定时刻时输出低电平. 3./INT2输出固定频率32768HZ. 4.测试每分钟边沿中断输出(INT MODE3)和每分钟固定中断输出(INT MODE4)功能-procedures used to test the real-time clock module SD2000 series of functional one : four interrupts functions of the program are as follows : 1. The SD2000 board real-time test of time 2./INT1 hours and minutes to the designated low-level output at the moment. 3./INT2 32768HZ fixed frequency output. 4. testing every minute edge interrupt output (INT MODE3) per minute and fixed interrupt output (INT MODE4) function
- 2023-06-17 10:35:04下载
- 积分：1
-
LENET5，JSP，minist数据集，GA算法，PSO算法源码
说明： 手写数字识别分类程序，phython语言实现，JSP，C++实现，GA算法，C++实现，PSO算法MATLAB实现(Handwritten numeral recognition and classification program, phython language implementation, JSP, C++ implementation, GA algorithm, C++ implementation, PSO algorithm MATLAB implementation)
- 2020-06-24 20:40:02下载
- 积分：1
-
1P MitiP gamma量测注意事项
说明： Gamma measurement points for attention
- 2020-06-18 11:00:01下载
- 积分：1
-
Vissim
实现c#连接vissim，并用pso算法优化交叉口信号配时，(vissim pso Intersection Signal)
- 2020-12-24 10:39:06下载
- 积分：1
-
juliangfa
说明： 设计一八木天线，振子数目为4，长度分别为：反射器长度0.39，主馈振子长度0.356，引向器长度均为0.3；反射器和主馈振子的距离0.265，主馈振子和第一引向器的距离0.2575，第一引向器和第二引向器的距离0.225。天线工作频率为400MHz，各振子分段数为9。
利用矩量法模拟该天线的电流分布，并绘制方向图。(A eight wood antenna is designed. The number of vibrators is 4 and the length is 0.39 for the reflector, 0.356 for the main feeder and 0.3 for the director. The distance between the reflector and the main feeder is 0.265, 0.2575 for the main feeder and the first director. The distance between the first director and the second director is 0.225. The working frequency of the antenna is 400MHz and the number of segments of each vibrator is 9.)
- 2020-02-20 22:53:54下载
- 积分：1
