-
HASPHL2010
HASPHL emulator 2010
- 2018-03-29 03:39:53下载
- 积分：1
-
Diffusion
利用MATLAB稳定求解高精度二维对流扩散方程(Solving High Precision Two-Dimensional Convection-Diffusion Equation with MATLAB)
- 2020-06-30 17:40:01下载
- 积分：1
-
model
泰森多边形模型，直接在comsol几何中导入(voronoi model,input in comsol)
- 2020-06-25 14:00:01下载
- 积分：1
-
kongjianpinghuajishu
说明： 此程序用于处理由于入射信源相干时，而导致秩亏损情况下的的DOA估计(DOA Estimation for Processing Coherent Sources)
- 2019-01-10 10:09:41下载
- 积分：1
-
3389远程
3389远程工具，一个远程管理源码，可参照修改，比如密码加密码(3389 remote tool, a remote management source, reference modification, such as password plus password)
- 2017-12-04 19:57:02下载
- 积分：1
-
On the surface, protected mode and real mode is not much difference between the...
从表面上看，保护模式和实模式并没有太大的区别，二者都使用了内存段、中断和设备驱动来处理硬件，但二者有很多不同之处。我们知道，在实模式中内存被划分成段，每个段的大小为64KB，而这样的段地址可以用16位来表示。内存段的处理是通过和段寄存器相关联的内部机制来处理的，这些段寄存器（CS、DS、 SS和ES）的内容形成了物理地址的一部分。具体来说，最终的物理地址是由16位的段地址和16位的段内偏移地址组成的。用公式表示为：物理地址=左移4位的段地址+偏移地址。-On the surface, protected mode and real mode is not much difference between the two are the use of the memory, Drivers interruption and equipment to deal with the hardware, but there are many differences. We know that in real mode which has been divided into memory, each the size of 64 KB. and the addresses of 16 can be used to express. Memory of the handling of the adoption and register linked to the internal mechanisms to deal with, of these registers (CS, DS, SS and ES) with the formation of a part of the physical address. Specifically, the ultimate physical address is 16 of the 16 addresses and the addresses of migration within the composition. The use of the formula is expressed as : physical address = 4 bits of the address offset address.
- 2023-02-13 11:45:04下载
- 积分：1
-
satellite-network-tdma
运用OPNET建立卫星通信网中多址接入方式TDMA模型(Establishment of a satellite communication network using OPNET in the TDMA multiple access model)
- 2020-12-11 19:19:17下载
- 积分：1
-
sxnb
说明： 基于simulink搭建了一个简易的三相电压型逆变器模型， 仿真结果验证了三相电压型逆变器的工作原理。(A simple three-phase voltage source inverter model is built based on simulink. The simulation results verify the working principle of the three-phase voltage source inverter.)
- 2019-06-19 22:36:12下载
- 积分：1
-
MATLAB命令大全
matlab 命令操作说明，命令提示符窗口中的快捷键及其使用说明 命令提示符窗口中的快捷键及其使用说明(matlab order operation)
- 2019-07-10 11:08:33下载
- 积分：1
-
bulk-download (1)
说明： matlab中的基于两点平的矢量控制，控制对象是永磁同步电机。(The two-point flat vector control in matlab, the control object is a permanent magnet synchronous motor.)
- 2019-05-02 00:55:10下载
- 积分：1
