-
MainPage
基于VC++的，以操作文件的方式（CreateFile,WirteFile,ReadFile）来操作串口实现的射频卡门禁系统，实现了包括读卡写卡，寻卡防冲突等功能。(Based VC++ in order to manipulate papers (CreateFile, WirteFile, ReadFile) to operate the serial interface of the RF card access control systems, including the realization of the card reader to write, look for cards anti-collision function.)
- 2013-06-28 15:30:21下载
- 积分：1
-
KeyBorad
扫描4X4键盘,并将键值在数码管和8个LED上显示,同时将键值通过串口或RS232端口或USB发送给PC机接收并解码来自标准键盘的基本按键的扫描码。(4X4 keypad scanning, and key in the digital tube and eight LED display, while the key through the serial port or RS232 port or a USB send the PC to receive and decode the scan code of the key from the standard keyboard.)
- 2012-12-07 11:33:37下载
- 积分：1
-
debye5(1)
说明： 由晶格振动声子态密度计算迪拜温度、比热、振动熵等热力学性质的程序。(the programme for caculation of the debye temprature，specific heat,
entropy and so on from the DOS of phonon )
- 2011-04-18 15:09:14下载
- 积分：1
-
Saleae
对于学习分析时序很有帮助，是一款逻辑分析仪的软件，很有用的。(Timing analysis is useful for learning, is a logic analyzer software, very useful.)
- 2015-04-26 21:01:18下载
- 积分：1
-
CC430-4-TIMER
CC430定时器应用程序定时2MS点亮LED灯，定时2MSLED灭。(CC430 timer application timing the 2MS light LED lights, timing 2MSLED off.)
- 2012-07-24 16:18:33下载
- 积分：1
-
XListCtrl_demo-20140610
主要是完成Listctr的封装,和对于xlistctrl
的一个实例程序 (The main package is completed Listctr)
- 2014-06-10 21:58:28下载
- 积分：1
-
yun-fang-dian-lu-
常见的经典的一些晕放电路，有需要的，可以看看。都是比较常见和常用的。(Common halo put some of the classic circuit, there is a need, you can see. Are relatively common and frequently used.)
- 2011-09-21 10:33:59下载
- 积分：1
-
press--TFT
adi公司的aduc7026开发板配套程序(adi' s aduc7026 development board supporting procedures)
- 2011-10-09 10:54:01下载
- 积分：1
-
ENC28J60DEMO
使用方法：
程序设置了ENC28J60的IP为192.168.0.15，模块通电后与电脑的网口用网线连接起来，
设置电脑的本地IP为192.168.0.**（**自定），网关为192.168.0.15,其他默认，配置
成功后便可以arp或ping模块。
打开浏览器，在地址里输入http://192.168.0.15/123456可打开开发板简单网页，页
面上通过按键来控制开发板LED的亮灭。(Use: setup the ENC28J60 of IP to 192.168.0.15, the module is powered on the computer' s Ethernet port using a cable connection up to set the computer' s local IP 192.168.0.** (** Custom), the gateway 192.168.0.15, default configuration is successful, it will make arp or ping module. Open the browser, enter the address http://192.168.0.15/123456 to open the development board simple web pages, and page keys to control the development board LED light off.)
- 2012-05-31 18:14:57下载
- 积分：1
-
C8051F060-AD-UART1
C8051F060 自带高速AD进行数据采集 可达100兆采样率 并切缓存与片外ram 并把采集数据通过串口发送给PC ( Data Acquisition example for C8051F060
Description: This example illustrates the use of ADC1 and the DMA to acquire and store
data. It is intended for use with the C8051F060 target board in the development kit.
// This code measures a signal at the AIN0 input with the 16-bit SAR ADC0.
// The data is sampled at a rate of 100kHz. ADC output data is transferred to
XDATA memory space using the DMA.
//
// With the EMIF configured for off-chip XRAM access (on the upper ports),
this code moves the ADC data to the C8051F060TB target boards s SRAM device.
// Once data acquisition is complete, the code then prompts the user to press the P3.7
// button on the target board when ready to receive the data via the UART0 serial port.
The TB features an RS-232 transceiver and connector, so the data can be transferred
// to a PC via its serial port.
//
The code is set to acquire up to 32768 samples (for 64kbytes of data). The SRAM device -
can accommodate up to 128kbytes, )
- 2014-07-03 18:46:42下载
- 积分：1
