登录
首页 » Others » winhex 模板

winhex 模板

于 2020-12-05 发布
0 245
下载积分: 1 下载次数: 1

代码说明:

一共所括102个模板文件AFP_Structured_Fields.tplBMP.tplBoot Sector FAT.tplBoot Sector FAT32.tplBoot Sector NTFS.tplCDFS Directory Entry Ascii.tplCDFS Directory Entry Unicode.tplCDFS Path Tables Ascii.tplCDFS Path Tables Unicode.tplCDFS Volume Descriptor.tplCDFS路径表.tplDalet BWF file header.txtDalet

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • 基于单片机的太阳能热水器辅助控制系统(源代码,论文,proteus仿真)
    本论文在介绍单片机、传感器、实时时钟的特点基础之上,详尽地说明了太阳能热水器控制系统的工作原理与方案设计。根据本设计的要求,采用STC89C52作为主控芯片。其他硬件部分包括:水温采集模块、水位监测模块、按键输入部分、LCD显示窗口及继电器控制模组,继电器控制模组有自动上水和程控加热部分构成。在软件方面,本设计采用模块化方式对系统进行分组设计,使得设计工作稳步展开,并且经过仿真验证,本系统的各个模块均正常工作,符合设计要求。基于单片机的太阳能热水器辅助控制系统(源代码,论文,proteus仿真)
    2020-12-03下载
    积分:1
  • tm1680参考
    /*********** TM1680 参考程序: 1、A1A0 采用MCU进行控制,实际使用时,可以将A1A0任意接高低电平,TM1680 ID改为相应指令即可; 2、该程序采用STC15W 芯片模拟IIC协议,IO口为双向IO口(无需设置输入与输出),如果MCU的IO口需要设置输入和输出,则在ACK时需要设置为输入 3、该芯片支持标准IIC协议************/#include #include "intrins.h"#include /****命令宏定义****/#define TM1680ID 0xe7
    2021-05-06下载
    积分:1
  • 中国地图(省)+世界地图(国家) shp格式
    shp格式的中国地图(省界)与世界地图(国界),中文地图
    2020-11-05下载
    积分:1
  • vs2008(mfc)通过ADO连接SQL SERVER 2008源码
    在OnInitDialog()中实现代码,演示了如何VS2008的MFC程序通过ADO连接到SQL SERVER2008上,并且进行插入操作
    2020-12-03下载
    积分:1
  • 信号分析抽取插值matlab代码
    代码模拟了信号分析中的抽取和插值过程,在求取均方误差的时候还有一点小瑕疵,仅供参考。
    2020-12-03下载
    积分:1
  • 数据挖掘教(浙大)PPT
    1、序论2、数据仓库和数据挖掘的OLAP技术3、数据预处理4、数据挖掘原语、语言和系统结构5、概念描述:特征化与比较6、大型数据库中的关联规则挖掘7、分类和预测8、聚类分析9、电子商务与数据挖掘
    2021-05-07下载
    积分:1
  • Matlab T-S模糊控制仿真
    Matlab 非线性T-S模糊控制仿真,本文件是某仿真塔温控动态控制实例
    2020-07-04下载
    积分:1
  • RTCM3.3协议全
    全新RTCM3.3协议完整版RTCM STANDARD 10403.3DIFFERENTIAL GNSS(GLOBAL NAVIGATION SATELLITE SYSTEMS)SERVICES – VERSION 3DEVELOPED BYRTCM SPECIAL COMMITTEE NO. 104OCTOBER 7, 2016COPYRIGHT©2016 RTCMRadio Technical Commission for Maritime Services1611 N. Kent St., Suite 605Arlington, Virginia 22209-214RTCM Paper 141-2016-SC104-STD000ocRTCMco00c30RTCM 10403. 3, Differential GNSS Global Navigation Satellite Systems)Services- Version 3, October 7, 2016This standard (referred to as version 3 has been developed by rtCm special Committee 104 as a moreefficient alternative to the standards entitled rtcm recommended standards for diffe rentialRecommended Standards for Differential gNss Global Navigation Satellite Systems Service, Version 2.x(Current version is 2. 3, now designated as RTCM 10402. 3. Service providers and vendors represented onthe SC104 Committee wanted a new standard that would be more efficient, easy to use, and more easilyadaptable to new situations. The main complaint was that the version 2. x parity scheme, which useswords with 24 bits of data followed by 6 bits of parity, was wasteful of bandwidth. Another complaint wasthat the parity was not independent from word to word. Still another was that even with so many bitsdevoted to parity the actual integrity of the message was not as high as it should be. Plus, 30-bit wordsare awkward to handle. the new standard version 3 is intended to correct these weaknessesUnlike Version 2. x, this standard does not include tentative messages The messages in Version 3 haveundergone testing for validity and interoperability and are considered to be permanent. amendments tothe standard may change the meaning of reserved bits or provide additional clarifying text, but no changeswill be made in the data fields. Changes will require new messages to be developed. In addition to themessages described in the current standard the committee continues to develop new messages whichare described in separately published amendments and periodically gathered into a new edition of thestandard. RTCM 10403x for dgNSS services is proving useful in supporting highly accurate differentialand kinematic positioning as well as a wide range of navigation applications worldwideNote that Version 3 messages are not compatible with Version 2. x. Since many receivers have beendesigned and programmed for use with Version 2. x messages, rtCm is maintaining both standards0402 3 and 10403, 3 as" standardsVersion 3.0The initial edition consisted primarily of messages designed to support real-time kinematic (RTK)operations. The reason for this emphasis is that rtk operation involves broadcasting a lot of informationand thus benefits the most from an efficient data format. Version 3.0 provided messages that supportGPS and gloNaSs rTK operations including code and carrier phase observables antenna parametersand ancillary system parametersVersion 3. 1(RTCM Standard 10403.1:The next edition, Version 3. 1 (RTCM Standard 10403. 1), incorporated GPS Network Corrections, whichenable a mobile receiver to obtain accurate rtk information valid over a large area. In addition, new GPSand GLoNaSS messages provide orbital parameters to assist in rapid acquisition a Unicode text messageis also provided for the transmission of textual data. Finally a set of messages are reserved for vendorswho want to encapsulate proprietary data in their broadcasts the gps Network Corrections enable amobile receiver to obtain accurate rtk information valid over a large area. the network rtk correctioninformation provided to a rover can be considered as interpolated corrections between the referencestations in the rtk network this interpolation is not perfect and varies with the actual conditions of theatmosphere. A residual interpolation error has to be expected. With sufficient redundancy in the RtKnetwork, the network server process can provide an estimate for residual interpolation errors. Suchquality estimates may be used by the rover to optimize the performance of rtk solutions The values maybe considered by the rover as a priori estimates only with sufficient tracking data available the rovermight be able to judge residual geometric and ionospheric errors itselfVersion 3. 1. Amendment 1:Amendments 1 was an extensive addition that adds rtcm messages containing transformation data andinformation about Coordinate reference Systems. For rtCm data supporting a rtk service, coordinatesare measured within the itrf or a regional realization surve yors and other users of rtk services mustnormally present their results in the coordinates of local datums. Therefore, coordinate transformationsare necessary. by having RTCM messages that contain transformation data and information about theCoordinate reference systems the users of the rtk service can obtain their results in the desired datumwithout any manual operations. the rtk service providers can then ensure that current information forthe computation of the transformations is always used. the convenience of this method will promote theacceptance of rtK servicesVersion 3. 1. amendment 2:Amendment 2 added residual error messages to support the use of Non-Physical or Computed referenceStations in a network rtk environmentVersion 3. 1. amendment 3:Amendment 3 addressed differences in the way gnss receiver manufacturers have implemented carrierphase encoding of some Version 3 messages so that carrier phase observations are in phase for all carrierphases of a specific frequency i e. they correct for quarter cycle phase shifts. others retain the quartercycle offset between the carrier phase observations in the data. this amendment documents the waydifferent manufacturers have handled the phase shift issue and prescribes a uniform approach for futureproducts.∨ersiⅰon3.1, Amendment4:Amendment 4 added sections 3.5.13 on glONASS Network rtK Correction Messages and 3.5. 14 on FKPNetwork Rtk Correction Messages Related revisions were also made elsewhere in the document.Version 3. 1. amendment 5Amendment 5 added section 3. 5. 12 on State Space Representation related revisions are also madeelsewhere in the document, along with some editorial correctionsVersion 3. 2(RTCM Standard 10403.2)Version 3.2 consolidates Version 3. 1 and all five amendments into a new edition, and it adds MultipleSignal Messages (MSM)as well. the Multiple Signal Message (MSm)format generates receiverobservables in the same way for all included satellite systems. the messages include compact and fullmessages for Pseudorange, PhaseRange, Carrier to Noise Ratio (standard and high resolution), andPhaseRangeratea table near the beginning of the standard lists which messages were included in each separate editionand amendment, so it should not be necessary for users to refer to older versions. Multiple signalMessages are a generic format that will be followed for all GNSs systems. version 3 originally consisted ofmessages for GPS and GLONASS, each in their own format Now with the imminent addition of signals forBeiDou, Galileo, and QZSS, as well as new signals provided by modernized GPS and GloNASS satellitesthe need for a consistent generic format became evident. service providers and users are urged to migrateto the MsM messages to make it easier to accommodate new gNss services(See The RTCM Multiple Signal Messages: A New Step in GNSS Data Standardization")Another newmessage is the gloNaSS Bias Information message. This message provides information which is intendedto compensate for the first-order inter-frequency phase range biases introduced by the reference receivercode- phase biasVersion 3.2, Amendment 1:Added Galileo F/NAv Satellite Ephemeris Data(msg. 1045 )and Bds MSM(msgs. 1121-1127)Version 3.2 amendment 2Added qzss ephemeris(msg. 1044 )and QZss MSm (msgs. 1111-1117Version 3. 3(RTCM Standard 10403.3)This new edition adds Satellite-Based Augmentation System Multiple Signal Messages to previouslydopted messages for GPS, GLONASS, Galileo, and QzssA new ephemeris message has been added for BeiDou(BDS)and a new I/NAV ephemeris message hasbeen added for Galileo. The new edition also reserves 100 messages be used exclusively by sc104 fornew message developmentFinally, the new edition makes consolidates previous amendments and makes numerous editorialImprovementsNavstar GPS Service, Version 2. x. Service providers and vendors represented on the scco000c30z1O2co00c30Contentsco00c30
    2020-06-27下载
    积分:1
  • 凝聚型层次聚类的matlab代码
    代码说明代码仅供学习研究,未经允许,请勿擅自商用。1.输入文件格式输入的文件要求为N行两列的形式,两列分别对应,输入数据点的X轴坐标和Y轴坐标。输入文件格式示例如下:0.821794 -0.04621531.03929 0.0608351.12046 0.07455681.02233 0.05147392.代码支持的凝聚层次聚类算法通过简要的修改代码中函数的参数,代码可以支持不同的凝聚方法,支持的凝聚方法如下,默认的为代码本身算法:单连接算法(默认,最近邻聚类算法,最短距离法,最小生成树算法);全连接算法(最远邻聚类算法,最长距离法);未加权平均距离法;加权
    2020-12-12下载
    积分:1
  • 毕业设计 基于MATLAB的qdpsk仿真调制解调序源码
    东西真的很不错 毕业设计专用。。。。。。。。。。。。。
    2020-11-30下载
    积分:1
  • 696518资源总数
  • 105958会员总数
  • 18今日下载