-
receive
单片机的串口接收程序，C语言实现编程，通讯模式是RS232模式。(MCU serial receiving procedures, C language programming, the communication mode is RS232 mode.)
- 2013-07-19 10:14:53下载
- 积分：1
-
UARTMSPG2553sbuff
此程序和上一个程序是用于51单片机和430单片机的通信，通信方式为单工，430做主机51做从机(This program and a program for 51 And 430 single-chip communication, means of communication for the simplex, 430 to do Host 51 to do slave)
- 2012-07-28 15:00:32下载
- 积分：1
-
PID
51单片机的pid程序，设定上下限，控制pwm的输出。(51 MCU pid procedures set upper and lower limits, control pwm output.)
- 2013-09-03 09:12:00下载
- 积分：1
-
STM32f103c8t6
说明： STM32f103c8t6英文详细文档，编程资料，寄存器(STM32f103c8t6 English Detailed Documents, Programming Materials, Registers)
- 2020-06-23 19:20:01下载
- 积分：1
-
i2c_slave_V1.2
在stm32单片机上，用IO口的上升沿和下降沿中断设计的I2C从机代码。测试通过。所有过程用状态机来控制，没有cpu空延时。
核心代码和单片机相关代码分开，方便移植。
主要用在项目验证和学习交流！(On stm32 microcontroller, with rising and falling IO port interrupt design of I2C slave code. The test. All the process is controlled by a state machine, no cpu empty delay. Microcontroller core code and related code separate, easy to transplant. Mainly used in the project validation and exchange of learning!)
- 2021-04-06 10:29:02下载
- 积分：1
-
XC800-FOC-KEIL
采用ukeil 写的电机FOC控制程序，MCU为XC886(Written using ukeil FOC motor control procedures, MCU for XC886)
- 2021-04-27 12:58:44下载
- 积分：1
-
12864huaxian
12864上面的并行画线，可以画圆，三角形，正方形，直线，正弦波(12,864 above the parallel line drawing, you can draw a circle, triangle, square, line, sine wave)
- 2013-08-20 16:28:28下载
- 积分：1
-
KEA驱动库
说明： 恩智浦KEA驱动库，代码搬运，可以参考学习，仅供参考。(En Zhipu KEA driver library, code handling, you can refer to learn, for reference only.)
- 2019-03-04 22:25:24下载
- 积分：1
-
pulse11
单片机脉冲计数程序，可计算输入脉冲值及误差值，串口写入读出通信。(Single-chip pulse-counting procedure, computable input pulse value and error value, and serial write to read out the communication.)
- 2011-06-28 07:22:06下载
- 积分：1
-
ROBOT-VOUCER-INPUT-FOR-KWH-METER
KWH METER ROBOT INPUT
- 2015-12-18 04:15:29下载
- 积分：1
