-
Practical.Analog.and.Digital.Filter
FIR数字滤波器程序代码,十分的有用哦。我一直都保存着的(FIR digital filter program code, very useful Oh. I have always kept the)
- 2008-08-25 10:53:25下载
- 积分：1
-
Untitled
说明： 滤波处理，对信号进行滤波处理，提取信号的故障特征频率(Filtering, filtering the signal, extract the fault characteristic frequency of the signal)
- 2010-04-17 12:03:03下载
- 积分：1
-
FCM
自己编写的matlab程序，实现了图像的模糊C均值分割，没有调用工具箱里的fcm函数，里面的图像，代码文件齐全，亲测可用(I have written the matlab program,did not call the toolbox FCM function to achieve the image of the fuzzy C mean segmentation. The code file is complete, can be debugged.)
- 2020-12-01 10:29:27下载
- 积分：1
-
multipath_code.zip
设计一完整的移动通信系统物理层传输方案
(WiMAX场景)：
试设计一完整的移动通信系统物理层传输方案并用MATLAB程序实现，要求满足以下指标：
1. 数据速率：5km/hr的移动速度下可实现60Mbps，同时在120km/hr的移动速度下可实现10Mbps，且Eb/No小于20dB时可实现误比特率Pe <= 10-4
2. 信号带宽为20MHz，工作在2GHz频带
3. 信道模型: COST207模型的6径瑞利信道(可参考程序 multipath_code.zip)
请给出以下结果：
A．收发机结构框图，主要参数设定；
B．
误比特率仿真曲线。(考虑非理想同步和信道估计)；(Design a complete system for mobile communications physical layer transmission scheme (WiMAX scene): try to design a complete system for mobile communications and physical layer transmission scheme to achieve with the MATLAB program, requires the following indicators: 1. Data rate: 5km/hr mobile speed can achieve 60Mbps, while the movement in the 120km/hr speed can achieve 10Mbps, and Eb/No less than 20dB can be achieved when the bit error rate Pe < = 10-4 2. signal bandwidth of 20MHz, the work in the 2GHz band 3. channel Model: COST207 model 6 path Rayleigh channel (refer to program multipath_code.zip) Please give the following results: A. Transceiver block diagram, the main parameter settings B. BER simulation curves. (Taking into account non-ideal synchronization and channel estimation) )
- 2011-01-17 18:33:42下载
- 积分：1
-
DCT_watermarking_System
A gr8 Adaptive DCT based watermarking system is implemented with a nice GUI for embedding, extraction and attacks
- 2010-05-18 13:23:12下载
- 积分：1
-
IPM
inverse perspective mapping
- 2013-11-18 17:19:03下载
- 积分：1
-
abs_model
汽车制动防抱死系统的MATLAB/SIMULINK仿真模型，通过门限值作用(MATLAB/SIMULINK simulation model of automobile anti-lock braking system, through the threshold effect)
- 2020-12-11 16:29:18下载
- 积分：1
-
Frank-Wolfe算法
Frank-Wolfe算法
被广泛应用于求解网络均衡流量分布问题，尤其是特别适用于UE规划问题的求解
(Frank-Wolfe algorithm is widely used to solve network equilibrium flow distribution problems, especially particularly suitable for UE Planning Problem)
- 2016-08-03 14:51:49下载
- 积分：1
-
xiamding
说明： 此程序是基于自适应限定记忆最小二乘法，运用递推算法。(This program is limited to memory based on adaptive least squares method, the use of recursive algorithms.)
- 2011-03-26 19:52:00下载
- 积分：1
-
inverter
基于matlab/simulink的三相PWM逆变器仿真建模，希望对大家有所帮助(Based on matlab/simulink three-phase PWM inverter simulation modeling, we hope to help)
- 2015-04-14 21:57:04下载
- 积分：1
