-
the-most-unusual-national-air
用matlab程序实现最炫民族风的演奏，已经试验，可以运行(Matlab program to achieve the most unusual national air play, already tested, you can run)
- 2012-05-28 21:08:00下载
- 积分：1
-
vector-controlof-inductionmotor
vector control of induction motor
- 2015-03-04 16:44:17下载
- 积分：1
-
项目4
说明： 任务：设计一个4×2.5Gbit/s 长距离光纤传输系统，并利用OptiSystem 仿真验证。
要求：
1．采用波分复用技术，波长设置以100GHz 为间隔，频率分别为193.1THz、193.2THz、193.3THz、193.4THz，每个波长传输速率为2.5Gbit/s（NRZ），传输距离为300km。采用常规光纤，光纤损耗系数为0.25dB/km。
2．单通道光发送机最大输出功率为0dBm，光接收机的接收光功率不低于－26dBm，过载点为－10dBm。
3．可以采用EDFA 作为线路放大器，其中EDFA 的输入功率限制在－18～2dBm，最大输出功率20dBm，增益范围为13～25dB，噪声指数4.0dB。(Task: Design a 4 x 2.5 Gbit/s long-distance optical fiber transmission system, and use OptiSystem simulation to verify.
Requirement:
1. Using wavelength division multiplexing technology, the wavelength is set at 100GHz intervals, with frequencies of 193.1 THz, 193.2 THz, 193.3 THz and 193.4 THz, respectively. The transmission rate of each wavelength is 2.5 Gbit/s (NRZ), and the transmission distance is 300 km. The loss coefficient of conventional optical fibers is 0.25dB/km.
2. The maximum output power of a single-channel optical transmitter is 0 dBm, and the receiving power of an optical receiver is not less than -26 dBm, and the overload point is -10 dBm.
3. EDFA can be used as line amplifier, where the input power of EDFA is limited to - 18-2dBm, the maximum output power is 20dBm, the gain range is 13-25dB, and the noise index is 4.0dB.)
- 2019-05-13 09:39:41下载
- 积分：1
-
FDNC
有限差分法求解振动力学中瞬态响应问题
matlab编写的GUI程序( Finite Difference Numerical Computation (FDNC) Program For calculating response of transient vibration)
- 2010-06-18 23:27:29下载
- 积分：1
-
The-Matlab-simulation
：为了提升自动控制原理课程的教学质量，改善解决课程中计算复杂、公式繁杂、难以理解等问题，我们将Matlab 仿
真技术运用于这门课程中，这款软件有助于提高学生的主动性和兴趣，促进学生分析理解问题和解决问题的能力。文章
主要介绍了Matlab 的概述和特点，Matlab 仿真技术在自动控制原理课程教学中的应用和实例等内容。(: In order to improve the quality of teaching automatic control theory courses, courses to improve the computational complexity of solving the formula complicated, difficult to understand and so on, we will Matlab simulation technology used in this course, this software helps improve students' initiative and interest, promote students' ability to analyze and understand the problem and solve the problem. The article describes an overview of the content and features of Matlab, Matlab simulation technology in teaching automatic control theory and examples of applications and so on.)
- 2013-12-10 16:48:40下载
- 积分：1
-
parafac_mimo
基于卷积信号的MIMO系统盲信号估计，运用卷积的方法进行盲信道估计(Convolution-based MIMO system, blind signal signal is estimated using the method of convolution-blind channel estimation)
- 2009-05-11 20:59:57下载
- 积分：1
-
DS_CDMA
针对DS-CDMA系统的QPSK调制方式的MATLAB仿真。(The simulation of QPSK modulation for DS-CDMA system based on MATLAB .)
- 2013-12-01 15:41:38下载
- 积分：1
-
usemplab
mplab使用指导,中文版本 ，快速掌握开发环境(MPLAB to use the guide, the Chinese version, rapid development environment master)
- 2007-08-15 21:15:20下载
- 积分：1
-
UML
System passenger turns giving agencies
- 2012-07-04 18:05:22下载
- 积分：1
-
RLC
RLC CIRCIUT OF CIRCUIT ANALYSIS S M FILE
- 2014-11-27 23:46:31下载
- 积分：1
