-
12864
点阵液晶屏的参考程序，内置菜单动能，大家可以研究一下(Dot matrix LCD screen reference program, built-in menu kinetic energy, we can look)
- 2011-11-11 18:53:23下载
- 积分：1
-
pic18f66j60_C_receiving
建立环状队列保存过去10个键盘状态，利用天然获得的时延，消键抖，防止连续动作，选择响应模式（下键或抬键动作）。还可以防止两键同按引起的误动作，这里主要靠键值识别，两键同下的键值与单键下键的值不同，拒绝之即可。(Create circular queue holds the state over the past 10 steps of the keyboard, using natural available delay, jitter elimination keys, to prevent the continuous action, select the response mode (the key or lift button action). You can also prevent the two key malfunction caused by the same, this is mainly identified by the key, two keys with one-touch keys with the following value under the key difference, the refusal can be.)
- 2010-09-16 19:54:21下载
- 积分：1
-
Bergeron-model
基于贝瑞隆模型的变压器保护，自己做的结课作业，绝对自己编写。(Bergeron model based transformer protection, their own job to do guitar lessons, write your own absolute)
- 2021-01-21 21:38:45下载
- 积分：1
-
cont_body
Simple example........
- 2014-10-16 04:39:43下载
- 积分：1
-
实验7 定时器中断实验 - 同时TIM2 4
说明： 32 F429同时使用定时器2和4实现中断控制LED0和1闪烁(USING TIM2 AND TIM4 IN THE MEANWHILE)
- 2020-06-23 23:00:01下载
- 积分：1
-
nRF24Z1_external_MCU_1_0
nordic 2.4G RF transceiver nRF24z01 firmware source code.(nordic 2.4G RF transceiver nRF24z01 firmw are source code.)
- 2007-04-12 14:13:36下载
- 积分：1
-
ADS1118 F407 口线模拟 spi
说明： 主控cpu采用stm32f407vet6,采用口线模拟的spi总线来采集ads1118的俩路输入模拟信号。信号输入范围为0--2.048V。对应0--65535.(The main control cpu adopts stm32f407vet6, and adopts the spi bus of port line simulation to collect the two input analog signals of ads1118. The signal input range is 0--2.048V. Corresponds to 0--65535.)
- 2021-05-06 16:31:53下载
- 积分：1
-
shouchi-zhendongyi
手持振动仪，自动通过傅里叶变换，提取峰峰值，来自动调整震动的幅度，(Handheld vibration, automatic Fourier transform, peak extraction, to automatically adjust the amplitude of vibration,)
- 2013-10-10 10:44:49下载
- 积分：1
-
danpianji
为您详细讲述单片机和接口技术细节，给您巨大的收获！(For you to describe in detail the technical details of single-chip microcomputer and interface, to you enormous harvest!)
- 2008-03-12 00:47:33下载
- 积分：1
-
RC500code
对RC500卡的读和写，假如刷卡正确的话模块上的LED灯就会亮，没有卡、卡不对、或是其他的不能识别的都不能通过(RC500 card to read and write, if correct module on the card will be light, LED lamp without card and card wrong, or other cannot identify cannot pass)
- 2010-09-06 19:02:38下载
- 积分：1
