-
ST7789S-G4A-APPLICATION-PACKAGE
ST7789S-G4A APPLICATION PACKAGE，包括AN和初始化代码，实现ST7789S驱动240RGB*320分辨率的TFT液晶驱动，2.4寸，2.8寸，3.2寸，对液晶行业设计工程师有很大帮助(ST7789S-G4A APPLICATION PACKAGE, including AN and initialization code to achieve ST7789S driver 240RGB* 320 resolution TFT LCD driver, 2.4 inch, 2.8 inch, 3.2 inch, LCD industry for design engineers are very helpful)
- 2021-04-09 15:39:00下载
- 积分：1
-
Template
说明： RC522读取卡片UID,ATK-ESP8266 WIFI功能实现(RC522 reads card UID, ATK-ESP8266 WIFI function realization)
- 2019-05-16 23:07:53下载
- 积分：1
-
实验5_硬件乘法器操作
说明： ＭＳＰ４３０Ｆ４４９的硬件乘法器操作IAR Practice code(MSP430F449 hardware multiplier operation code IAR Practice)
- 2005-09-08 13:39:08下载
- 积分：1
-
MCS21-ASM7
MCS51 单片机源码系列之 第七章 数学函数 (MCS51 series single-chip source mathematical functions under Chapter VII)
- 2009-04-28 20:40:47下载
- 积分：1
-
MCG
MC9S12DZ60时钟初始化程序, C语言, code warrior 软件(initial program of MCG, C language，code warrior software)
- 2012-01-02 18:01:07下载
- 积分：1
-
28335_ECAN_1PROGRAM
参考ti提供得例子程序，先将他们得例子在自己得板子上跑起来，其实就是用自测试得方式来验证一下程序，也可以加些中断，看看程序怎么跑得。这步没问题得话，可以改写程序，当然还在自测试模式下先试，如果可以改写后，在自测试模式下可以。那么就差不多了，将自测试模式改成正常模式，将程序移植到自己得程序中，拿一个经过验证可以正常通讯得can模块通讯，记得两个can得速率要一致。当然这个can模块还要能让你看到或者说能验证你得can是否通讯正常。(Reference ti provide examples of procedures was, first they have to run up on the example of the board that she has, in fact, self-test was used to verify the program mode, you can also add some interruption to see how to run the program. This step was not a problem, you can rewrite the program, of course, still in test mode since the first try, if you can rewrite, can in self-test mode. Well almost, the self-test mode to normal mode, the program was ported to own program, get a proven module can communicate normally too can communicate, remember that two can get a rate to be consistent. Of course, this can also allow you to see the module or can verify whether you have can communicate properly.)
- 2014-07-10 20:13:37下载
- 积分：1
-
NewGestureSensorV1.0
STM32平台下使用LTC2400来采样数值，采取SPI的进行通讯。(By using the STM32 platform，use LTC2400 to sample values, use the SPI communication.)
- 2020-11-30 20:59:27下载
- 积分：1
-
USART
说明： Examples of STM8L USART. Transmit and Receive. Tx string. char,
- 2020-10-29 16:45:41下载
- 积分：1
-
孵化环境温湿度监控系统设计
说明： 如果要将此应用项目移植到开发板上，只需要根据此项目的电路图修改管脚，改成我们开发板对应的管脚上。温湿度传感器使用的是DHT11，所以数据口按照原理图内接。温度传感器接口也需要修改成我们开发板对应的接口(If you want to transplant this application project to the development board, you only need to modify the pins according to the circuit diagram of this project and change it to the corresponding pin of our development board. The temperature and humidity sensor uses DHT11, so the data port is internally connected according to the schematic diagram. The temperature sensor interface also needs to be modified to the corresponding interface of our development board)
- 2020-05-13 15:03:45下载
- 积分：1
-
TOUCH0
it s a touch panel for elevator with pic18f46k22
- 2012-07-15 20:53:12下载
- 积分：1
