登录
首页 » 嵌入式系统 » 这个是用muxpulsII制作的有时钟功能的电路是属于数字逻辑的

这个是用muxpulsII制作的有时钟功能的电路是属于数字逻辑的

于 2022-01-25 发布 文件大小:203.40 kB
0 127
下载积分: 2 下载次数: 1

代码说明:

这个是用muxpulsII制作的有时钟功能的电路是属于数字逻辑的--A circuit with clock function. It is made by muxpulsII and belong to numeric logic category.

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • STC12C5a60s2通过按键产生占空比1-99%可调的PWM波
    应用背景可用于各种需要PWM波的芯片,PWM的作用很多,也可以固定输出一个占空比和频率的方波,还可以再利用电源造SPWM关键技术STC12C5a60S2用定时器0产生1Khz的方波,通过按键可调节占空比,1-99%可调,通过数码管显示占空比,兼容普通的89C52, 只是运行速度不够快,频率要低一点,可以通过修改定时器的值改变频率
    2022-01-25 17:26:42下载
    积分:1
  • stm32 rfid智能卡
    读取操作 stm32zet6读取rfid卡实验,并可以通过串口设置密码,读取操作
    2022-02-07 12:15:48下载
    积分:1
  • 一个小测试程序希望,朋友有所帮助,赶快下吧@@!!VERILOG
    一个小测试程序希望,朋友有所帮助,赶快下吧@@!!VERILOG-Test procedure, a small hope that friends help, as soon as possible, are you @ @!! VERILOG
    2022-10-19 06:45:03下载
    积分:1
  • STM32F103为SSD1289 lib
    STM32F103的SSD1289驱动程序。
    2022-02-07 10:31:44下载
    积分:1
  • 2440 jlink project flash AMD160LVDB
    jlink的 2440配置工程文件 flash 用的是AMD160LVDB-2440 jlink project flash AMD160LVDB
    2022-01-26 07:37:13下载
    积分:1
  • 使用dsPIC30F 实现交流感应电机的矢量控制源代码,可以通过此源代码学习SVPWM及交流电机的矢量控制算法...
    使用dsPIC30F 实现交流感应电机的矢量控制源代码,可以通过此源代码学习SVPWM及交流电机的矢量控制算法-DsPIC30F realize the use of AC induction motor vector control source code, you can learn through this source code and SVPWM AC motor vector control algorithm
    2022-05-25 01:01:59下载
    积分:1
  • 本文件是用keil编程的,控制51单片机流水灯的程序
    本文件是用keil编程的,控制51单片机流水灯的程序-This document is keil programming, single-chip flow control lamp 51 procedures
    2022-10-09 22:00:02下载
    积分:1
  • 不错的门例子,在avr上搞到的,真的不做,自己试做了一下,...
    不错的入门例子,在avr上搞到的,真的不做,自己试做了一下,-Started good example, in the avr
    2022-10-25 05:20:03下载
    积分:1
  • Xilinx IIC IP
    由 Xilinx 提供的 IIC 接口,使用 AXI interface。 Features ‧ AXI interface is based on the AXI4-Lite interface ‧ Master or slave operation ‧ Multi-master operation ‧ Software selectable acknowledge bit ‧ Arbitration lost interrupt with automatic mode switching from master to slave ‧ Calling address identification interrupt with automatic mode switching from master to slave ‧ START and STOP signal generation and detection ‧ Repeated START signal generation ‧ Acknowledge bit generation and detection ‧ Bus busy detec ‧ Fast mode 400 KHz operation or standard mode 100 KHz ‧ 7-bit or 10-bit addressing ‧ General call enable or disable ‧ Transmit and receive FIFOs - 16 bytes deep ‧ Throttling ‧ General purpose output, 1 bit to 8 bits wide ‧ Dynamic Start and Stop generation ‧ Filtering on the SCL and SDA signals to eliminate spurious pulses
    2023-09-07 01:15:03下载
    积分:1
  • This document is keil software keyboard control procedures scanning method using...
    本文件是用keil软件编程的键盘控制程序,用扫描法控制51单片机的键盘-This document is keil software keyboard control procedures scanning method using the keyboard control 51 single-chip
    2023-02-19 03:45:03下载
    积分:1
  • 696518资源总数
  • 106140会员总数
  • 8今日下载