-
触摸屏设计开发详细资料以及参看设计电路板图
触摸屏设计开发详细资料以及参看设计电路板图-Touch-screen design and development of detailed information and refer to design the circuit board diagram
- 2022-03-20 18:29:44下载
- 积分:1
-
读写weigant输出Kei uVision开放!
mifare 读卡器weigant输出有kei uvision打开!-MIFARE reader weigant output is Kei uvision open!
- 2022-01-21 02:16:39下载
- 积分:1
-
系统能够产生正弦波、方波、三角波。同时还可以作为频率计测频率。函数信号的产生由MAX038和外围电路完成,能产生1Hz―20MHz的波形。...
系统能够产生正弦波、方波、三角波。同时还可以作为频率计测频率。函数信号的产生由MAX038和外围电路完成,能产生1Hz―20MHz的波形。-system can produce sine, square, triangle wave. Also as frequency measurement frequency. Signals generated by the MAX038 completed and the external circuit, which can produce 1Hz- 20MHz waveforms.
- 2022-01-25 23:04:02下载
- 积分:1
-
51 single
51单片机实用子程序库,含有详尽的单片机资源调用子程序-51 single-chip utility subroutine library, which contains detailed subroutine calls single-chip resources
- 2022-03-24 22:14:32下载
- 积分:1
-
这是一个信号发生器的程序,适用于iar环境,可用于msp430的单片机
这是一个信号发生器的程序,适用于iar环境,可用于msp430的单片机
-This is a signal generator procedures, applicable to iar environment, can be used for MSP430 microcontroller
- 2023-01-09 12:55:03下载
- 积分:1
-
条码读入CPU
1. 与条码读入器的通讯
1.1 采用标准的UART通讯协议,波特率为9600,没有校验位,一个停止位。
1.2 通讯的过程是单工的...
条码读入CPU
1. 与条码读入器的通讯
1.1 采用标准的UART通讯协议,波特率为9600,没有校验位,一个停止位。
1.2 通讯的过程是单工的,数据流总是从条码读入器到CPU。
1.3 正常的数据传送总是以一个换行符开始,六个数字,以一个回车符结束。
-51
- 2023-01-23 17:15:03下载
- 积分:1
-
用89c51单片机与USBD12结合的电路图和源程序..
用89c51单片机与USBD12结合的电路图和源程序.. -with 89c51 SCM and USBD12 combination of circuit and the source ..
- 2022-06-18 08:51:16下载
- 积分:1
-
MSP430框架程序。适用于MSP430F449,其他型号需要适当改变。 不使用的中断函数保留或者删除都可以,但保留时应确保不要打开不需要的中断。 保留中断函数...
MSP430框架程序。适用于MSP430F449,其他型号需要适当改变。 不使用的中断函数保留或者删除都可以,但保留时应确保不要打开不需要的中断。 保留中断函数,编译器将会为BSL密码填充所有的字节。-MSP430 framework procedures. Applicable to MSP430F449, other models need to be properly changed. Do not use the interrupt function can be retained or deleted, but should be retained to ensure that do not open unwanted interruption. Retain the interrupt function, the compiler will fill all of the BSL-byte password.
- 2022-02-07 17:16:41下载
- 积分:1
-
按键扫描驱动程序。51单片机。c语言编程。
按键扫描驱动程序。51单片机。c语言编程。-button scanning driver. MCU 51. C programming language.
- 2022-03-19 07:23:03下载
- 积分:1
-
80C51编写看门狗程序,该程序是数字电压我…
80C51编写的看门狗程序,本程序是为了数字电压表的看们狗设计-80C51 watchdog prepared by the procedure, the procedure is to digital voltage meter to see who the dog design
- 2022-04-29 08:19:40下载
- 积分:1