登录
首页 » uCOS » ucgui3.90原吗,有memdev部分,支持彩旦

ucgui3.90原吗,有memdev部分,支持彩旦

于 2022-02-05 发布 文件大小:7.77 MB
0 126
下载积分: 2 下载次数: 1

代码说明:

ucgui3.90原吗,有memdev部分,支持彩旦-ucgui3.90 the original right, has memdev part, support彩旦

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • 原创!!! 刚刚完成的ucos2 2.76 for 瑞萨m16/60
    原创!!! 刚刚完成的ucos2 2.76 for 瑞萨m16/60 -original! ! ! Just completed ucos2 2.76 for Renesas m16/60
    2023-08-07 17:55:03下载
    积分:1
  • STM32F103C8T6_UCOS_DEMO
    说明:  这是按照前面我发的从零开始学习ucosii手册,编写成功的模板。芯片是stm32f103c8t6,移植在f103芯片上,都是同理可得。记住虽然可以直接拿着用,但是要修改对应的IO口哦,程序效果是led小灯闪烁。(有一个问题我也不太清楚,理论上c8t6的启动文件应该是startup_stm32f10x_md.s,但是用它却不能成功。用startup_stm32f10x_hd.s却成功了。)(This is a successful template written in front of the uCOSII manual that I started from zero. The chip is stm32f103c8t6, and the transplant is on the F103 chip. Remember that although it can be used directly, but to modify the corresponding IO mouth Oh, the program effect is the LED light flicker. (there is one problem I'm not very clear about. In theory, c8t6's startup file should be startup_stm32f10x_md.s, but it can't be successful with it. It was successful with startup_stm32f10x_hd.s.))
    2018-02-03 15:40:42下载
    积分:1
  • Successfully transplanted to 51 MCU ucosii
    成功把ucosii移植到51单片机上-Successfully transplanted to 51 MCU ucosii
    2022-05-14 20:34:39下载
    积分:1
  • 51移植UCOS源代码,看不懂...自己去研究.
    51移植UCOS源代码,看不懂...自己去研究.-51 transplant uCOS source code, can not read ... their own to study.
    2022-09-04 11:10:03下载
    积分:1
  • uC_FS文件系统的源码,支持FAT16/FAT32文件系统,大家参考一下.
    uC_FS文件系统的源码,支持FAT16/FAT32文件系统,大家参考一下.-uC_FS file system source code, file system support FAT16/FAT32, your reference.
    2023-04-16 14:00:03下载
    积分:1
  • ucosII移植到STM32处理器上的源码
    ucosII移植到STM32处理器上的源码-STM32 processor ucosII transplanted to the source
    2023-08-16 17:55:04下载
    积分:1
  • ucosIIforMX21
    ucosII在DRAGONBALL MX21上的移植 开发环境为IAR (ucosII DRAGONBALL MX21 in a development environment for transplantation IAR)
    2007-02-09 09:36:22下载
    积分:1
  • uCOSIII3.03PuCGUI3.98
    这个是可以直接在红牛开发板上运行的uCOSIII+uCGUI,3.2TFT屏, FWLib3.5+uCOSIII3.03+uCGUI3.98红牛开发板!(This is directly in the Red Bull development board running uCOSIII+uCGUI, 3.2TFT screen,)
    2013-09-21 16:37:44下载
    积分:1
  • Based on the sd card operated uCOS source, including read and write functions.
    基于ucos的sd卡操作源程序,包括读写功能等。-Based on the sd card operated uCOS source, including read and write functions.
    2023-07-09 03:10:03下载
    积分:1
  • this the source code, you can be interested in reading
    这个是UCOS的源代码,大家有兴趣可以-this the source code, you can be interested in reading
    2022-12-28 13:10:03下载
    积分:1
  • 696518资源总数
  • 105877会员总数
  • 14今日下载