-
三星的NAND
三星的NAND-FLASH，有1G字节的存储空间。-Samsung
- 2022-03-24 07:37:07下载
- 积分：1
-
nand flash 的测试代码，非常好，值得研究
nand flash 的测试代码，非常好，值得研究 -nand flash test code, very good, worthy of study
- 2022-06-28 10:48:44下载
- 积分：1
-
The project is based on an embedded s3c2410 led by a test code
该工程是一个基于嵌入式s3c2410的一个led测试代码-The project is based on an embedded s3c2410 led by a test code
- 2023-07-21 07:00:03下载
- 积分：1
-
AT91SAM7S64_debug.rar
AT91SAM7S64_debug.rar-AT91SAM7S64调试笔记-AT91SAM7S64_debug.rar-AT91SAM7S64 Debugging Notes
- 2022-01-26 03:11:41下载
- 积分：1
-
在阳初2410开发板移植U
在阳初2410开发板移植U-Boot1.2.0的详细笔记，本人按照这个笔记在SMDK2410的开发板上通过测试。-In the beginning of 2410 development board yang transplantation of the U-Boot1.2.0 detailed notes, I SMDK2410 according to the notes in the development of on-board to pass the test.
- 2022-03-03 06:55:32下载
- 积分：1
-
sdconfig.h: The document for the SD card reader module configuration header file...
sdconfig.h: 该文件为SD卡读写模块配置头文件，用户可根据实际硬件条件进行修改.
SD目录 : SD卡读写模块的全部文件,一般不用修改.
建议sdconfig.h文件不要放于SD目录中，因为SD目录中的文件一般无须修改,而sdconfig.h通常会有改动.
-sdconfig.h: The document for the SD card reader module configuration header files, the user hardware according to actual conditions can be modified. SD directory: SD card reader module all the documents, the general need not be amended. sdconfig.h document recommends not to put in SD directory, because the SD files in the directory are not normally required to be amended and the changes are usually sdconfig.h.
- 2022-03-12 03:53:48下载
- 积分：1
-
运算放大器使用指南，来自于AD公司。为中英文版本。
运算放大器使用指南，来自于AD公司。为中英文版本。-Operational Amplifiers using the guidelines, and from the AD. Chinese and English versions.
- 2022-02-10 08:51:45下载
- 积分：1
-
altera fpga ep3c25器件微处理器开发，niosii+sram, 已编译通过，可直接下载到开发板...
altera fpga ep3c25器件微处理器开发，niosii+sram, 已编译通过，可直接下载到开发板-altera fpga ep3c25 the development of microprocessor devices, niosii+ sram, compiled through, can be directly downloaded to the development board
- 2022-07-20 14:35:12下载
- 积分：1
-
fgdfdsf DS图
提示：你将赚取积分（0-20）的基础上，你的产品质量
- 2022-02-14 22:01:16下载
- 积分：1
-
S3C2440 startup assembly code, where it should be noted that at the beginning of...
S3C2440的启动汇编代码，这里要注意的是开头的几个异常跳转，因为ARM不支持中断地址重映射，大家这里要多花心思体会，呵呵！～-S3C2440 startup assembly code, where it should be noted that at the beginning of a few abnormal Jump, because ARM does not support interrupt address re-mapping, everyone here thought it takes experience, huh, huh! ~
- 2022-10-11 15:30:03下载
- 积分：1
