登录
首页 » 嵌入式系统 » 摄像头采集程序(verilog)

摄像头采集程序(verilog)

于 2022-02-21 发布 文件大小:6.50 kB
0 122
下载积分: 2 下载次数: 1

代码说明:

程序文件包括CMOS摄像头寄存器控制程序、VGA显示程序、IIC通讯协议程序,适用于一般图像传感器图像采集应用前端部分。读者可在此程序的基础上修改、添加内容以适合自己设计应用。

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • 一个很好的linux平台下的bootloader,适用于mips体结构,是不可多得的学习linux引导的资料,也可以用于实际项目。...
    一个很好的嵌入式linux平台下的bootloader,适用于mips体系结构,是不可多得的学习linux引导的资料,也可以用于实际项目。-a good embedded Linux platform under the Bootloader applies to MIPS architecture is a rare study guide linux information can also be used to the actual project.
    2022-05-15 18:06:37下载
    积分:1
  • 运行在arm平台linux中,使用qt软件开发,可以接受串口数据,并且在打开的窗口中用曲线的方即时显示出来。程序中用到串口方面以及qt图形界面和c++知识。...
    运行在arm平台linux中,使用qt软件开发,可以接受串口数据,并且在打开的窗口中用曲线的方式即时显示出来。程序中用到串口方面以及qt图形界面和c++知识。-Run on arm platform, linux, using qt software development, can accept serial data, and open the window curves method using real-time display. Procedures used in serial port as well as qt graphical interface, and c++ knowledge.
    2022-03-20 11:37:16下载
    积分:1
  • Abstract: The guidance system consists of the sound systems and car audio guidan...
    摘要:该声音导引系统由声音导引主控系统和小车控制系统两部分组成。声音导引主控系统主要由主控MCU、声音接收部分、无线发射模块组成。小车控制系统主要由MCU、固化模块NEC、电机驱动部分、声光部分及无线接收模块组成。该系统的最大特点在于其软件设计使用层次化、模块化设计方法,系统低功耗,性价比低。经调试和测试,系统各项性能参数达到设计指标。 关键词:声音导引、无线收发、声源移动、M 智能语音小车-Abstract: The guidance system consists of the sound systems and car audio guidance master control system composed of two parts. Sound-guided mainly by the main control system master MCU, the sound receiving part, the wireless transmitter module component. Vehicle control system mainly consists of MCU, curing module NEC, motor drive parts, sound and light parts and the wireless receiver module. The most prominent feature of the system software designed for use in its hierarchical, modular design approach, the system low-power, low cost. The debugging and testing, system performance parameters to achieve the design target. Key words: sound guidance, wireless transceiver, a sound source movement, MCU, NEC, motor drive
    2023-08-25 12:00:05下载
    积分:1
  • 本程序完成在dsp 的平台下,完成对原始图象的采集和编码工作,可以在matlab下显示...
    本程序完成在dsp 的平台下,完成对原始图象的采集和编码工作,可以在matlab下显示--Under dsp platform, it collects and decodes the original graphics. They could be displayed in matlab.
    2023-08-01 06:15:03下载
    积分:1
  • lpc2138 基于数字显示
    此代码将指示如何显示数字类型中的虚拟终端......此内容包括 proteus 仿真 keil 环境中的代码。
    2022-03-20 03:17:45下载
    积分:1
  • 基于STM32的modbus串口通讯协议+485通讯
    资源描述基于STM32的modbus串口通讯协议+485通讯,该程序以stm32开发板为实验平台,经过测试可以实现stm32开发板与上位机以modbus通讯协议的方式进行串口通讯。这样就可以实现通过上位机对开发板进行实时操作
    2022-10-04 13:30:04下载
    积分:1
  • 算法支持的操作。非常适合移植的朋友。
    linux环境支持psos的操作系统。非常适合进行移植的朋友。-PsOS support of the operating system. Very suitable for a transplant friends.
    2023-05-18 09:50:03下载
    积分:1
  • 神舟3号开发板stm32_ADC程序
    嵌入式神舟系列,单片机开发试验仪,神舟3号开发板,stm32_ADC实现模数转换。ADC采集频率为12MHz,采集管脚PC3,采集数据经过平滑滤波,排除瞬间干扰。串口输出转换电压值,串口波特率为9600,数据位8,无校验,停止位1。
    2022-08-20 09:37:37下载
    积分:1
  • 用AT89C52演奏音乐,并带有跑马灯。可用Proteus 仿真运行。
    用AT89C52演奏音乐,并带有跑马灯。可用Proteus 仿真运行。-AT89C52 concert with music, and with Bomadeng. Proteus running simulation can be used.
    2023-06-19 20:45:03下载
    积分:1
  • ucos2在macroblaze上的移植代码
    ucos2在macroblaze上的移植代码-ucos2 transplantation in the macroblaze code
    2022-01-26 18:28:23下载
    积分:1
  • 696518资源总数
  • 105877会员总数
  • 14今日下载