-
C51单片机
Ｃ５１单片机模拟Ｉ２Ｃ双机通信协议，带从机部分。-C51 single-chip analog dual I2C communication protocol, with some from the machine.
- 2022-01-26 07:35:25下载
- 积分：1
-
此程序是用于单片机e2rom读写的程序。
此程序是用于单片机e2rom读写的程序。-The firmware of the USBisp is easy to upgrade. A software upgrade works also via the USB interface. The package contains a STK500 compatible bootloader so you can use avrdude to update the firmware. There are 7k of flash left in the ATMega8
- 2023-02-11 23:40:03下载
- 积分：1
-
Achieve more than 16* 16LED screen shows a number of characters, displayed on th...
实现多个16*16LED屏的多个字符显示,显示方式有整行上移、帘入帘出、左移、右移-Achieve more than 16* 16LED screen shows a number of characters, displayed on the entire line has moved a curtain to curtain, the left, shifted to right
- 2022-07-22 11:21:52下载
- 积分：1
-
C51 examples, please take a look at each other all of the other party to the oth...
C51 examples, please take a look at each other all of the other party to the other side is a
- 2023-07-31 22:20:03下载
- 积分：1
-
使用AVR128单片机控制串行DA转换器TLV5618进行DA转换，计算精度高...
使用AVR128单片机控制串行DA转换器TLV5618进行DA转换，计算精度高-The use of AVR128 SCM TLV5618 serial DA converters for DA conversion, calculation and high precision
- 2023-01-24 21:15:04下载
- 积分：1
-
此程序含有仿真电路图和C语言程序，希望能够对单片机爱好者有用...
此程序含有仿真电路图和C语言程序，希望能够对单片机爱好者有用-This program contains a circuit diagram and the C language simulation procedures can be useful for single-chip lovers
- 2022-01-30 18:48:10下载
- 积分：1
-
红外线遥控解码器,该程序实现将红外遥控器发出的红外线解码，并通过LCD显示出来...
红外线遥控解码器,该程序实现将红外遥控器发出的红外线解码，并通过LCD显示出来 -infrared remote control decoder, the program will infrared remote control and using the infrared decoding, and out through the LCD display
- 2022-12-27 20:15:04下载
- 积分：1
-
ISD_调试范例,nRF9E5的C语言编程.
ISD_调试范例,nRF9E5的C语言编程.-ISD_ debugging example, nRF9E5 the C language programming.
- 2022-12-28 10:25:03下载
- 积分：1
-
超声波避障小车的设计.声明本文章乃个人觉得有用转载而来
超声波避障小车的设计.声明本文章乃个人觉得有用转载而来-Ultrasonic Vehicle Obstacle Avoidance design. Statement This article is reproduced from individuals find useful
- 2023-08-08 18:05:03下载
- 积分：1
-
使用键盘上的上、下、左、右四个按键，可以分别控制led1,2,3,4, 每个LED 对应的Port 请参考“实验平台介绍”说明文档。要求按下
上面提到的四个...
使用键盘上的上、下、左、右四个按键，可以分别控制led1,2,3,4, 每个LED 对应的Port 请参考“实验平台介绍”说明文档。要求按下
上面提到的四个按键中间的一个按键后，该按键对应的led 被点亮，持续1 秒钟以后led 熄
灭。-Use the keyboard on the upper and lower, left, and right buttons, can control led1, 2,3,4, each LED corresponding to the Port, please refer to " experiment on" documentation. Requirements of the four above-mentioned press the middle button of a button, the button that corresponds to being light led, continuous 1 second later led out.
- 2022-03-19 11:23:13下载
- 积分：1
