-
net_driver
dm9000a，DM9161AE的驱动程序，写的很详细。可以用在ucos上(dm9000a, DM9161AE driver, written in great detail. Can be used in ucos on)
- 2013-07-09 23:54:40下载
- 积分：1
-
在GBA中实现的GUI源代码，编译环境为ads2.0，欢迎下载。
在GBA中实现的GUI源代码，编译环境为ads2.0，欢迎下载。-in achieving the GUI source code, compile the environment ads2.0 welcome to download.
- 2022-01-25 14:24:33下载
- 积分：1
-
将ucos
将ucos-II 移植到
KeilC51 的小模式下。由于小模式运行速度比大模式运行速度快很多，这将有利于提高系统
的速度。-Ucos-II will be transplanted to the small mode KeilC51. Due to the small mode large mode faster than a lot of speed, which will help improve system speed.
- 2022-03-21 17:30:21下载
- 积分：1
-
STM32PUCOS-II=GPIO_PS2_TIM
1.板上的8 个按键分别分别代表数字1-8，按下一个按键将结果通过串口发送到PC机上显示；
2.使用两个定时器模块，分别定时为1ms 和100ms 产生中断，使用它们分别
产生1s的定时时间，将时间分别显示到数码管上；
3.外接PS/2小键盘，将按键的值通过串口显示到PC机上。(A panel of eight key representing the number 1-8 press a key the results sent through the serial port on a PC display
(2) use two timer modules, respectively, of 1ms and 100ms timer generates an interrupt, use them, respectively,
Produce the timing of the 1s, the time display to the digital control
External PS/2 keyboard, the key value of displayed through the serial port to a PC.)
- 2020-09-08 15:18:03下载
- 积分：1
-
基于ucos的7段式led显示程序。可以方便的移植到不同的平台。能够任意位置显示。...
基于ucos的7段式led显示程序。可以方便的移植到不同的平台。能够任意位置显示。-Based on the 7-piece ucos display program led. Can be easily ported to different platforms. Be able to show anywhere.
- 2022-05-18 09:44:58下载
- 积分：1
-
ucos的使用，包含在86上的移植，需要的赶紧下啊，时间不多了...
ucos的使用，包含在86上的移植，需要的赶紧下啊，时间不多了-ucosde shiyong,baohan zai 86shangde yizhi,xuyao de ganjinxia a ,shijian bu duo le
- 2023-08-18 19:30:04下载
- 积分：1
-
实现LCD的控制显示等功能，主要运行平台ADS1.2
实现LCD的控制显示等功能，主要运行平台ADS1.2-Realize the control of LCD display and other functions, the main operating platform ADS1.2
- 2022-02-05 10:39:10下载
- 积分：1
-
这是bootloader源码，希望对大家有所帮助
这是bootloader源码，希望对大家有所帮助-source, we hope to help
- 2022-05-28 22:26:49下载
- 积分：1
-
STM32F103C8T6_UCOS_DEMO
说明： 这是按照前面我发的从零开始学习ucosii手册，编写成功的模板。芯片是stm32f103c8t6，移植在f103芯片上，都是同理可得。记住虽然可以直接拿着用，但是要修改对应的IO口哦，程序效果是led小灯闪烁。（有一个问题我也不太清楚，理论上c8t6的启动文件应该是startup_stm32f10x_md.s，但是用它却不能成功。用startup_stm32f10x_hd.s却成功了。）(This is a successful template written in front of the uCOSII manual that I started from zero. The chip is stm32f103c8t6, and the transplant is on the F103 chip. Remember that although it can be used directly, but to modify the corresponding IO mouth Oh, the program effect is the LED light flicker. (there is one problem I'm not very clear about. In theory, c8t6's startup file should be startup_stm32f10x_md.s, but it can't be successful with it. It was successful with startup_stm32f10x_hd.s.))
- 2018-02-03 15:40:42下载
- 积分：1
-
ucosIIforMX21
ucosII在DRAGONBALL MX21上的移植 开发环境为IAR (ucosII DRAGONBALL MX21 in a development environment for transplantation IAR)
- 2007-02-09 09:36:22下载
- 积分：1
