-
SONIX SCM's original code! Is to use A/D MCU I do one of the procedures char...
SONIX单片机的原代码!是用带A/D口的单片机来做一款充电器的程序!-SONIX SCM"s original code! Is to use A/D MCU I do one of the procedures charger!
- 2022-03-03 23:07:01下载
- 积分:1
-
本源码是关于1602液晶模块的驱动,开发工具是CodeWarrior for ARM Developer Suite即ADS...
本源码是关于1602液晶模块的驱动,开发工具是CodeWarrior for ARM Developer Suite即ADS-This source is about the 1602 LCD driver module, development tools are CodeWarrior for ARM Developer Suite that ADS
- 2023-02-23 19:55:03下载
- 积分:1
-
周立功的arm7源码----好东西,一般的起始代码范例,觉得不错,推荐一下...
周立功的arm7源码----好东西,一般的起始代码范例,觉得不错,推荐一下-weeks meritorious arm7 source-good things, the general initial code examples, think it"s good, what recommendation
- 2022-01-26 00:13:09下载
- 积分:1
-
经过检验的4510B的BOOT启动代码,是烧到FLASH里面的呦
经过检验的4510B的BOOT启动代码,是烧到FLASH里面的呦-tested 4510B the BOOT boot code is spread to the inside strove FLASH
- 2022-07-07 01:55:20下载
- 积分:1
-
S3C2410A的UCOS内核,可以供ARM初学初学者使用
S3C2410A的UCOS内核,可以供ARM初学初学者使用-UCOS the S3C2410A core, you can use for beginners beginner ARM
- 2022-08-20 15:09:30下载
- 积分:1
-
数字投影仪,ARM下的例程,参考下希望对大家有帮助
数字投影仪,ARM下的例程,参考下希望对大家有帮助-Digital projectors, ARM under the routine, refer to the following people want to help
- 2022-07-22 14:25:34下载
- 积分:1
-
power PCB 教程
power PCB 教程-power PCB Guide
- 2023-03-06 20:35:03下载
- 积分:1
-
使用键盘上的上、下、左、右四个按键,可以分别控制led1,2,3,4,每个LED 对应的Port 请参考“实验平台介绍”说明文档。要求按下
上面提到的四个按...
使用键盘上的上、下、左、右四个按键,可以分别控制led1,2,3,4,每个LED 对应的Port 请参考“实验平台介绍”说明文档。要求按下
上面提到的四个按键中间的一个按键后,该按键对应的led 被点亮,持续1 秒钟以后led 熄
灭。-Use the keyboard on the upper and lower, left, and right buttons, can control led1, 2,3,4, each LED corresponding to the Port, please refer to " experiment on" documentation. Requirements of the four above-mentioned press the middle button of a button, the button that corresponds to being light led, continuous 1 second later led out.
- 2023-07-07 06:15:03下载
- 积分:1
-
arm架构的说明,比较详细的一个文档
arm架构的说明,比较详细的一个文档-arm structure of the note, a more detailed document
- 2022-05-18 10:36:39下载
- 积分:1
-
基于UART的加法器的实现
应用串口调试工具作为外部输入与输出的接口,实现多位数的相加。即通过UART串口分别输入需要相加的多位数A与B,最后把A和B两个多位数相加的过程和结果,回显给用户。具体实现方法:应用UART中断。
- 2022-03-26 18:52:25下载
- 积分:1