-
T-Ker测试synchronization_communicationsemaphore部分的tk_cre_sem,tk_del_sem, tk_sig_sem, tk_wai_sem, tk_ref_sem在移植的uT-Engine上运行是否正常。
api的返回值正确与否，在ads上设断点观察，同时用Lpc2104上的LED显示（如果正确，则程序中设定的LED就闪亮）nel中的flag小实验程序-T- Ker test synchronization_communication tk_cre_sem part of the semaphore, tk_del_sem. tk_sig_sem, tk_wai_sem. tk_ref_sem transplantation in the UT-Engine running normal. Api return to the correct value, based on the ads breakpoint observation, Lpc2104 using the LED display (if correct, procedures were set on the flashing LED) nel flag of the small experimental procedure
- 2022-06-02 06:30:47下载
- 积分：1
-
East China Normal University Master
华东师大硕士论文嵌入式图形用户界面系统的研究与开发-East China Normal University Master
- 2022-03-19 21:12:20下载
- 积分：1
-
CodeVision AVR C实例源程序字符周期
Code Vision AVR C 源程序例子
八字循环程序
-Code Vision AVR C example source program character cycle
- 2022-02-12 19:05:39下载
- 积分：1
-
浴室控制办电路图
浴室控制办电路图--Circuit diagram for bathroom controller.
- 2022-07-04 05:52:38下载
- 积分：1
-
在linux系统下使用终端烧写扬创UTU2440－F的板子NANK FLASH的软件，速度比较慢，一般用来烧写BOOTLOADER的文件，之后可以使用BOOTL...
在linux系统下使用终端烧写扬创UTU2440－F的板子NANK FLASH的软件，速度比较慢，一般用来烧写BOOTLOADER的文件，之后可以使用BOOTLOADER进行其它文件烧写。
把BOOTLOADER生成的BIN文件放在Jflash目录下,如：u-boot.bin，与Jflash-s3c2440同一目录，之后在终端输入命令：
cd ../Jflash
./Jflash-s3c2440 u-boot.bin /t=5
回车后出现选择项，全部选择0选择即可，烧写时时间比较久，请内心等待。
-linux use Jflash to loaddown bin file to utu2440-f s NANDFLASH.
- 2022-03-02 21:42:47下载
- 积分：1
-
C51
C51-CPLD联合开发板的原理图。以调试通过，并做出成品，功能还算可以！-C51-CPLD joint development board schematics. In order to debug through, and make finished products, function still can!
- 2023-07-24 05:45:03下载
- 积分：1
-
MSP430F449与ATT7022开发的一款三相表demo，完善中，其中的几个程序模块，仅供参考。...
MSP430F449与ATT7022开发的一款三相表demo，完善中，其中的几个程序模块，仅供参考。-MSP430F449 with the ATT7022 the development of a three-phase table demo, perfect, where several program modules for reference purposes only.
- 2022-11-05 18:20:03下载
- 积分：1
-
神泉工具
Castalia tools
installation, documentation, guide, ...
useful for wireless sensor network
- 2023-05-03 18:30:04下载
- 积分：1
-
ARM7 development of the full source portal classic reference ARM
ARM7开发全部源代码经典ARM入门参考-ARM7 development of the full source portal classic reference ARM
- 2022-08-03 17:18:15下载
- 积分：1
-
Quartus II 7.2 NET例程
DE2_NET
-------
This designs demonstrates how to use the Ethernet port using a Nios II system on the DE2 board. It sends packets, and using a loopback Ethernet cable, it"ll receive the same packets which are then displayed. It also works if the board is connected to another packet source.
Running the Design
------------------
1) Launch the Quartus II software.
2) Open the DE2_NET.qpf project located in the DE2_NET folder. (File menu -> Open Project)
请点击左侧文件开始预览 ！预览只提供20%的代码片段，完整代码需下载后查看 加载中 侵权举报
- 2022-02-15 17:13:55下载
- 积分：1
|
联系客服（QQ：3324461878）
