-
CH375 USB interface chip MSP430 platform agreement under the procedure instance
CH375 USB接口协议芯片MSP430平台下的实例程序-CH375 USB interface chip MSP430 platform agreement under the procedure instance
- 2022-07-21 07:01:10下载
- 积分：1
-
基于usb 芯片net2272的一个loopback的程序，稍加修改，即可移植到你的mcu或者dsp上...
基于usb 芯片net2272的一个loopback的程序，稍加修改，即可移植到你的mcu或者dsp上-Net2272 on a usb chip loopback procedure, slightly modified, can be transplanted to your mcu or dsp on
- 2023-01-29 19:05:04下载
- 积分：1
-
USB
USB的驱动编程实例，有一定的参考价值，可供学习及研发参考-USB-driven programming examples are useful for reference and research and development study
- 2022-03-04 16:50:55下载
- 积分：1
-
some examples of EZUSB s interrupt routine
some examples of EZUSB s interrupt routine
- 2022-07-20 10:03:39下载
- 积分：1
-
USB 飞力浦固件开发源码:基本业务处理功能，完整开发文档，已编译通过...
USB 飞力浦固件开发源码:基本业务处理功能，完整开发文档，已编译通过-the USB source of Philips:
the base function ,all empolder source code,can compile OK.
- 2023-05-10 07:30:03下载
- 积分：1
-
procedure for the adoption of the single
该程序用以通过单片机来控制芯片CH375
实现对海量存储器的读写操作-procedure for the adoption of the single-chip microcomputer to control chip to achieve CH375 Massive Memory read and write operation
- 2022-04-11 19:15:23下载
- 积分：1
-
200 yuan bought D12 development information, including PC drives and application...
200元买来的D12开发资料,包括上位机驱动和应用程序，电路图，固件。-200 yuan bought D12 development information, including PC drives and applications, schematics, firmware.
- 2022-05-24 05:03:53下载
- 积分：1
-
This is the official website of usb in the last year of the USB3.0 specification
这是usb官方网站的在去年出的USB3.0的规范-This is the official website of usb in the last year of the USB3.0 specification
- 2022-10-24 12:40:03下载
- 积分：1
-
USB通讯控件,Bulk通讯方式,可以直接从USB设备中读取数据保存为文件,或者把文件发送给USB设备,用于三星2410相关开发....
USB通讯控件,Bulk通讯方式,可以直接从USB设备中读取数据保存为文件,或者把文件发送给USB设备,用于三星2410相关开发.-USB communications controls, Bulk means of communication directly from the USB device to read data saved as a file, or the document sent to the USB device, for 2410 related to the development of Samsung.
- 2023-06-22 03:40:04下载
- 积分：1
-
USB设备
USB设备端固件程序,枚举部分是全部程序的基础和重心,只有主机对设备枚举成功后,主机才能和设备进行正常的通信
USB的枚举过程分为4个状态.
1.接入态
v主机检测到USB设备插上,击活端口,并发送复位命令(保持10ms)
2.默认态
v主机使用默认地址读取设备描述符 (GET_DESCRIPTOR)
v主机分配给设备一个总在线的唯一地址 (SET_ADDRESS)
3.地址态
v主机从新的地址获取设备描述符(GET_DESCRIPTOR)
v主机获取所有设备的配置描述符(GET_DESCRIPTOR)
4.配置态
v主机设置描述符(设备,配置) (SET_CONFIGURATION)
v主机读取配置状态(可选) (GET_CONFIGURATION)
v主机读取接口状态(可选) (GET_INTERFACE)
-USB device-side firmware, enumerate all part of the foundation and focus of the procedure, only the host of equipment after the successful enumeration, the host and equipment in order to engage in normal communication USB enumeration process is divided into four status. 1. Access state v host detected USB devices plug in, hit live ports, and send the reset command (to maintain 10ms) 2. default state v Use the default address of the host to read device descriptor (GET_DESCRIPTOR) v host assigned to the equipment of a total online only Address (SET_ADDRESS) 3. A
- 2022-01-21 17:52:38下载
- 积分：1
|
联系客服（QQ：3324461878）
