登录
首页 » 嵌入式芯片 » FPGA 串口自发自收

FPGA 串口自发自收

于 2022-04-09 发布 文件大小:80.45 kB
0 119
下载积分: 2 下载次数: 1

代码说明:

资源描述 FPGA verilog  串口自发自收接收数据  波特率9600

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • 这是费浙平写的《ARM 体系结构及基于ARM 的开发》非常不错。...
    这是费浙平写的《ARM 体系结构及基于ARM 的嵌入式开发》非常不错。-Zhejiang-written "ARM Architecture and ARM-based embedded development" very good.
    2022-04-13 15:32:33下载
    积分:1
  • 电机是使机械能与电能相互转换的机械,直流电机把直流电能变为机械能。作为机电执行元部件,直流电机内部有一个闭合的主磁路。主磁通在主磁路中流动,同时与两个电路交联,...
    电机是使机械能与电能相互转换的机械,直流电机把直流电能变为机械能。作为机电执行元部件,直流电机内部有一个闭合的主磁路。主磁通在主磁路中流动,同时与两个电路交联,其中一个电路是用以产生磁通的,称为激磁电路,另外一个是用来传递功率,称为功率回路或者电枢回路。-Motor is to convert between mechanical energy and power of machinery, the DC to DC motor into mechanical energy. Executive Yuan as the mechanical and electrical components, DC motor inside the main magnetic circuit has a closed. The main magnetic flux flowing in the main magnetic circuit, while cross-linked with the two circuits, one circuit is used to generate magnetic flux, called the exciting circuit, another one is used to transfer power, known as the power circuit or the armature circuit .
    2022-06-27 14:04:53下载
    积分:1
  • SSD1305驱动源码
    经过大量测试,稳定可靠,可用于51单片机驱动SSD1305芯片控制的液晶屏。采用C语言模拟SPI接口,实现51与SSD1305通讯。
    2022-03-24 22:11:07下载
    积分:1
  • 44b0x的中文手册
    44b0x的中文手册-44b0x Chinese Manual
    2022-06-29 19:56:49下载
    积分:1
  • EasyARM2131开发板源码之一
    EasyARM2131开发板源码之一--- -----5.IOPIN的特殊应用-EasyARM2131 one source development board----------- 5. The special application IOPIN
    2022-01-26 00:05:55下载
    积分:1
  • C8051F410 ADC例子
    此示例代码需要平均为 2048年模拟测量从输入 P1.1 使用 ADC0,然后将结果打印到终端窗口通过 UART。该系统由内部 24.5 MHz 振荡器的时钟频率。定时器 2 触发每个溢出上 ADC0 转换。在完成这种转换反过来触发中断服务例程 (ISR)。ISR 平均 2048年测量,然后打印到 printf 之前通过终端值开始另一种的平均周期。模拟多路复用器选择 P1.1 作为积极 ADC0 输入。此端口被配置为模拟输入端口初始化例程中。负 ADC0 输入通过多路复用器到地面,那为单端 ADC 的输入提供了连接。
    2023-05-03 07:10:03下载
    积分:1
  • ZLG基于IAR的1700demo,可作为门基础指导程序
    ZLG基于IAR的1700demo,可作为入门基础指导程序-ZLG based on IAR" s 1700demo, could serve as a Getting Started guide program
    2022-05-16 23:48:00下载
    积分:1
  • Steger_Warming lusgs算法
    Steger-Warming 的FVS(矢通量分裂格式) lusgs算法对Riemann初始间断的分解问题,程序可实现无条件稳定
    2022-03-17 09:26:32下载
    积分:1
  • CAN ARM
    CAN ARM相关通信源代码,希望对大家有帮助-CAN ARM
    2022-03-18 05:51:09下载
    积分:1
  • static display 8,051 procedure will be preset in the display buffer of 6% corres...
    静态显示8051程序, 将预置在显示缓冲区中的6个数置换成相应的显示字形,然后输出到显示器中显示。运行以上程序,数码管将显示543210。-static display 8,051 procedure will be preset in the display buffer of 6% corresponding number of replacement shows font, then the output to a monitor display. Run the above procedures, digital pipe to show 543,210.
    2022-03-24 10:58:19下载
    积分:1
  • 696518资源总数
  • 105877会员总数
  • 14今日下载