-
基于S3C2440，温度传感器18b20，实现温度采集，并从串口打印出来。...
基于S3C2440，温度传感器18b20，实现温度采集，并从串口打印出来。-Based on S3C2440, temperature sensor 18b20, to achieve the temperature acquisition, and print them out from the serial port.
- 2022-06-12 08:44:40下载
- 积分：1
-
2410各功能口驱动！与大家分享
2410各功能口驱动！与大家分享...
2410各功能口驱动！与大家分享
2410各功能口驱动！与大家分享-I drive the 2410 feature! 2410 to share with you the various features I drive! To share with you
- 2023-08-24 01:30:05下载
- 积分：1
-
This is the start loading code
这是ARM的启动装载代码-This is the start loading code
- 2022-05-08 08:16:46下载
- 积分：1
-
nand flash读写实验代码，不可多得
nand flash读写实验代码，不可多得-Experimental code to read and write nand flash, rare
- 2022-03-05 08:10:25下载
- 积分：1
-
AT91SAM7A3 evaluation version of the USB test procedure, IAR preparation.
AT91SAM7A3评估版的USB测试程序，IAR编制。-AT91SAM7A3 evaluation version of the USB test procedure, IAR preparation.
- 2022-07-02 20:03:31下载
- 积分：1
-
ARM的操作系统UC/OS，学ARM入门的一个很好的实时性很好的操作系统，大家可以下载...
ARM的操作系统UC/OS，学ARM入门的一个很好的实时性很好的操作系统，大家可以下载-ARM" s operating system UC/OS, learning ARM to get into a good a good real-time operating system, you can download to see if
- 2023-08-31 11:00:02下载
- 积分：1
-
本人自己设计的一个ARM最小系统， 使用ARM7芯片是SAMSUNG的S3C44B0 现已经调试成功...
本人自己设计的一个ARM最小系统， 使用ARM7芯片是SAMSUNG的S3C44B0 现已经调试成功-my own design an ARM smallest system, using ARM7 chip is Samsung"s S3C44B0 have now successfully Debugging
- 2022-05-22 00:42:21下载
- 积分：1
-
ARM处理器和FPGA在数据传输中的应用与研究
ARM处理器和FPGA在数据传输中的应用与研究-ARM processor and FPGA data transmission in the Application and Research
- 2022-08-23 19:46:40下载
- 积分：1
-
his project was built and tested with WinAVR
his project was built and tested with WinAVR-20060125.
Make sure the MCU target define in the Makefiles corresponds to the AVR you are using!!
To build the code, just install WinAVR and run "make" from the console in echomaster and
echoslave subdirs.
"make program" will program the device if you have a AVRISP attached.
Remember to set the AVR device to at least 8MHz. The AVR may use the programmable clock
from MC1319x, just remember to check if the MC1319x and SPI communication is working FIRST!
Otherwise you wont get any clock signal to the AVR and then you can t program it or reset
the fuses!
The MC1319x has default clock output of 32kHz so you will have to set your programmer to
a very low frequency (
- 2023-02-22 21:55:03下载
- 积分：1
-
2410例为钙
2410 example for calc
- 2022-04-07 09:23:30下载
- 积分：1
