登录
首页 » 嵌入式芯片 » MPC8260的Fast Ethernet的例子。配置FCC为Fast Ethernet模式,然后接MII口。用标准C语言编写。...

MPC8260的Fast Ethernet的例子。配置FCC为Fast Ethernet模式,然后接MII口。用标准C语言编写。...

于 2022-04-17 发布 文件大小:99.25 kB
0 136
下载积分: 2 下载次数: 1

代码说明:

MPC8260的Fast Ethernet的例子。配置FCC为Fast Ethernet模式,然后接MII口。用标准C语言编写。-MPC8260 Fast Ethernet example. FCC configuration for Fast Ethernet model, then the MII mouth. Using standard C language.

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • msp430 按键程序
    msp430 单片机按键试验程序,实现单个按键和多个按键的练习,本程序由C语言编写,实现按键过程是通过函数调用实现的,非常是适合初学者学习。
    2022-04-30 01:24:10下载
    积分:1
  • ARM键盘,LCD驱动程序
    ARM键盘,LCD驱动程序-ARM keyboard, LCD Driver
    2022-03-07 09:17:18下载
    积分:1
  • ZLG基于IAR的1700demo,可作为门基础指导程序
    ZLG基于IAR的1700demo,可作为入门基础指导程序-ZLG based on IAR" s 1700demo, could serve as a Getting Started guide program
    2022-05-16 23:48:00下载
    积分:1
  • stm32步进电机SPWM细分控制,matlab仿真
    应用背景在网上看到了相应算法,用stm32 编程出来与大家分享,网上很少有这资源,可以用在stm32细分控制步进电机,在转速低时,噪声小,也更为精确,等同于步进电机驱动器关键技术SPWM算法,以及用stm32仿真三角波。说实话网上很少用stm32中央对齐方式仿真三角波的,但是在DSP上很是普遍,所以这也是我分享出来的原因之一。
    2023-01-24 04:30:07下载
    积分:1
  • AT91SAM7S64 to do with the USB port with an RS232 device: PC on the driver sourc...
    用AT91SAM7S64 的USB口 做一个RS232的设备 包含: PC上的驱动程序 KEIL下的源码 简单的使用手册 是一份不错的学习资料 -AT91SAM7S64 to do with the USB port with an RS232 device: PC on the driver source code under KEIL a simple user" s manual is a good learning materials
    2022-02-21 12:22:21下载
    积分:1
  • stm32f407 GPIO
    本示例描述如何切换个 GPIO 引脚连接 AHB 总线上。 PD12,PD13,PD14 和 PD15 (在输出推挽模式中配置) 在一个永远循环切换。 -设置 PD12、 PD13、 PD14 和 PD15 的 BSRRL 中设置相应位注册 -重置 PD12、 PD13、 PD14 和 PD15 的 BSRRH 中设置相应位注册
    2022-10-12 13:30:03下载
    积分:1
  • STM32开发板之MP3程序
    /*Includes----------------------------------*/ #include"stm32f10x_lib.h" //包含所用的头文件 #include #include"vs1003.h" #include"spi.h" //---------------------函数的声明--------------------------- void Delay_Ms(u16 time); void RCC_Configuration(void); void GPIO_Configuration(void);
    2022-01-23 11:23:12下载
    积分:1
  • A simple C program to strobe the LEDsvia Port D. The strobe rate is to be set by...
    A simple C program to strobe the LEDsvia Port D. The strobe rate is to be set by adjusting the voltage drop over a potentiometer that is sampled by an ADC.
    2022-04-21 21:27:13下载
    积分:1
  • 2132AD转换,调试过,可以运行。上传此程序希望能和大家互相学习。...
    2132AD转换,调试过,可以运行。上传此程序希望能和大家互相学习。
    2022-07-24 05:57:35下载
    积分:1
  • 驻留监控程序.需要的就下吧,免费的。大家交个朋友,顺便评价下...
    驻留监控程序.需要的就下吧,免费的。大家交个朋友,顺便评价下-presence of the monitoring program. Need on the next bar, free of charge. Members pay friends evaluation under way
    2023-03-27 01:00:04下载
    积分:1
  • 696516资源总数
  • 106409会员总数
  • 8今日下载