-
可用于任何单片机平台的I2C总线读写程序，IO脚模拟。
可用于任何单片机平台的I2C总线读写程序，IO脚模拟。-Single-chip platform can be used for any of the I2C bus to read and write procedures, IO pin analog.
- 2022-03-20 00:55:12下载
- 积分：1
-
uIP运行于8位
uIP运行于8位-16位单片机上TCPIP协议源码0.9 我自己做过的 很好的 希望与大家爱好者分享-Application of ulP runs on eight 16-bit microcontroller agreement on the source of 0.9 TCPIP I done good and we hope to share lovers
- 2022-02-05 17:52:58下载
- 积分：1
-
2300时钟芯片的读写函数。主要说明SD2300时钟的应用
2300时钟芯片的读写函数。主要说明SD2300时钟的应用-2300 clock chip to read and write function. The main clock SD2300 Application Note
- 2023-06-02 07:30:02下载
- 积分：1
-
Ks0108_LCD driver. Has detailed instructions. Ks other series LCD can refer to P...
Ks0108_LCD 驱动程序。有详细的说明。其他的Ks系列的LCD可以参照编程-Ks0108_LCD driver. Has detailed instructions. Ks other series LCD can refer to Programming
- 2022-11-07 14:10:02下载
- 积分：1
-
TW8817PCB 模拟TFT屏驱动，已通过调试
TW8817PCB 模拟TFT屏驱动，已通过调试-lcd TFT
- 2023-04-18 08:45:03下载
- 积分：1
-
C51 source code, drive 74164
C51源代码，驱动74164》，这个程序太简单了，不过省得大家自己写了-C51 source code, drive 74164
- 2022-01-24 13:35:25下载
- 积分：1
-
模拟交通灯，并带有数字显示的程序。初始时全为红灯，显示“HELLO”字样。然后交通灯以“红绿、红黄、绿红、黄红”四种状态做循环，而且黄灯会闪烁，每种状态都带有到...
模拟交通灯，并带有数字显示的程序。初始时全为红灯，显示“HELLO”字样。然后交通灯以“红绿、红黄、绿红、黄红”四种状态做循环，而且黄灯会闪烁，每种状态都带有到数记时。当按下P3_2时，变成“红红”状态，并显示“STOP”字样！
-simulated traffic lights and figures with the procedure. When all of the initial red, shows that the "hello" words. Then traffic lights to the "black, red and yellow, green, red, yellow red" state to do four cycle, but the yellow light flashes, each state will have a few to remember when. When pressed P3_2, into a "red" state, and shows that the "STOP" word!
- 2022-01-26 03:16:31下载
- 积分：1
-
ARM 44b0x的LCD接口源代码,并且已经调试通过
ARM 44b0x的LCD接口源代码,并且已经调试通过-ARM 44b0x LCD interface source code, debugging and has passed
- 2022-04-19 01:25:37下载
- 积分：1
-
这是一个单片机上实现T9输入法的程序，使用C语言编写。
这是一个单片机上实现T9输入法的程序，使用C语言编写。-This is a single-chip realization of the T9 input method of procedure, the use of C language.
- 2022-02-15 11:44:16下载
- 积分：1
-
利用KEIL C51语言编写的T6963C液晶驱动程序,头文件有具体的连接定义和汉字字库,只要硬件连接好,一定可以运行,不象有人纯粹为了下载别人的代码...
利用KEIL C51语言编写的T6963C液晶驱动程序,头文件有具体的连接定义和汉字字库,只要硬件连接好,一定可以运行,不象有人纯粹为了下载别人的代码-use KEIL C51 prepared by the T6963C LCD driver, the first document linking specific definition and Chinese character, as long as the hardware connection, and will be able to run, unlike some others simply to download the code
- 2022-04-11 14:05:26下载
- 积分：1
