登录
首页 » SCM » C c++program Featuring high performance and versatility

C c++program Featuring high performance and versatility

于 2022-04-20 发布 文件大小:233.04 kB
0 162
下载积分: 2 下载次数: 1

代码说明:

c c++语言编程 的仪表放大器原理分析 - 模数电路 - 新势力论坛 单片机,嵌入式,51,ARM,AVR,工控,自动化-C c++program Featuring high performance and versatility

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • 次文件包括uCOS
    次文件包括uCOS-II中使用,ZLG_FS在CF卡上的例子,ARM采用的是LPC2210.-Meeting documents include uCOS-II use, ZLG_FS in the CF card example, ARM using the LPC2210.
    2022-06-20 16:16:14下载
    积分:1
  • IAR例子,里面是一个完整的四位LCD液晶显示例子。
    IAR例子,里面是一个完整的四位LCD液晶显示例子。-IAR examples, which is a complete example of the four LCD liquid crystal display.
    2023-02-02 16:55:04下载
    积分:1
  • 89c51单片机定时中断动态四数码管显示的控制程序
    89c51单片机定时中断动态四数码管显示的控制程序-Interrupted from time to time 89c51 single-chip digital display dynamic four of the control procedures
    2023-02-26 04:55:03下载
    积分:1
  • fet440_wdt_02.s43
    fet440_wdt_02.s43 - WDT, Toggle P5.1, Interval Overflow ISR, 32kHz ACLK-fet440_wdt_02.s43- WDT, Toggle P5.1, Interval Overflow ISR, 32kHz ACLK
    2022-05-14 22:12:55下载
    积分:1
  • The design of single
    本设计的由单片机控制的自动加料系统是与料斗式干燥机配套的加料系统。根据加料工艺要求,其工作原理是:先将真空管关闭,启动电机,用低真空气流将塑料树脂粒子送入真空管,电机停转,再将粒子排入料斗,如此循环。-The design of single-chip microcomputer controlled by the automatic feeding system with hopper dryer feed supporting system. Charging process in accordance with the requirements of its working principle is: first vacuum tube to close, start motor, using low vacuum plastic resin particles will flow into the vacuum tube, the electrical switch to stop, and then particles into the hopper, and so the cycle.
    2022-05-27 04:59:44下载
    积分:1
  • 电机不转,按下启动键,电机旋转,速度为25转/分,按下加1 键,速度增加,按下减1 键,速度降低,最高速度为100 转/分,最低转带为25 转/分,按下停止键,...
    电机不转,按下启动键,电机旋转,速度为25转/分,按下加1 键,速度增加,按下减1 键,速度降低,最高速度为100 转/分,最低转带为25 转/分,按下停止键,电机停转。速度值要求在数码管上显示出来。-Motor does not turn, press the start button, motor rotation speed of 25 rev/min, press the 1 key, the speed increase by 1 press the button to lower the speed, the maximum speed of 100 r/min, with a minimum of 25 to r/min, press the stop button to stop motor. Speed value of the requirements in the digital tube display.
    2022-10-12 04:45:03下载
    积分:1
  • SMC162的驱动 源码在51单片机中测试过
    SMC162的驱动 源码在51单片机中测试过-SMC162 source of the 51 drivers in single-chip tested
    2023-08-30 14:05:03下载
    积分:1
  • MSP430模拟串口程序,希望对大家学习430单片机有用... ... ... ...!...
    MSP430模拟串口程序,希望对大家学习430单片机有用... ... ... ...!-MSP430 analog serial procedures, and they hope to learn from U.S. 430 Singlechip useful ... ... ... ...!
    2022-05-30 00:30:38下载
    积分:1
  • Verilog realize the DDS sine wave signal generator and frequency measurement mod...
    Verilog实现的DDS正弦信号发生器和测频测相模块,DDS模块可产生两路频率和相位差均可预置调整的值正弦波,频率范围为20Hz-5MHz,相位范围为0°-359°,测量的数据通过引脚传输给单片机,单片机进行计算和显示。-Verilog realize the DDS sine wave signal generator and frequency measurement module test phase, DDS module can generate both frequency and phase difference can be preset to adjust the value of sine wave, frequency range of 20Hz-5MHz, phase range of 0 °-359 ° , measurement data and transmit them to the single-chip pin, single-chip microcomputer to calculate and display.
    2022-04-02 09:35:43下载
    积分:1
  • The use of assembly language, design a reading environment temperature and displ...
    利用汇编语言,设计一个读取环境中的温度并显示出来的系统-The use of assembly language, design a reading environment temperature and display system
    2023-05-27 18:25:04下载
    积分:1
  • 696518资源总数
  • 106227会员总数
  • 11今日下载