-
93CXX的驱动程序
93CXX的驱动程序-93CXX driver
- 2022-04-13 17:03:18下载
- 积分:1
-
51 single
51单片机控制TC35I无线通信模块的完整Keil C程序,还包含GB2312与Unicode转换,国标汉字、ASC字符显示,串口通信,液晶模块控制等程序。-51 single-chip wireless communication module TC35i control the integrity of Keil C procedures, also includes GB2312 and Unicode conversion, GB characters, ASC characters display, serial communications, LCD module control procedures.
- 2022-01-25 16:13:13下载
- 积分:1
-
CY68013 USB2.0 speed on the bulk of the test procedure, interested can download...
关于CY68013 USB2.0批量速度的测试程序,感兴趣的可以下载看看.-CY68013 USB2.0 speed on the bulk of the test procedure, interested can download and see.
- 2022-02-24 16:46:19下载
- 积分:1
-
程序资料共享 希望大家共同进步 共同努力 加油 !
程序资料共享 希望大家共同进步 共同努力 加油 !-Procedures for the sharing of information would like the common progress of the joint efforts of U.S. refueling!
- 2023-02-23 10:25:03下载
- 积分:1
-
这是一个用单片机来演奏音乐的程序,很通俗易懂,里面有源程序和HEX烧录文件...
这是一个用单片机来演奏音乐的程序,很通俗易懂,里面有源程序和HEX烧录文件-This is a single-chip to play music with the procedure, it is easy to understand, which has source code and HEX file burner
- 2022-03-21 18:46:06下载
- 积分:1
-
犯错
红外解码程序主要工作为等待红外线信号出现,并跳过引导信号,开始收集连续32位的表面数据,存入内存的连续空间。位信号解码的原则是:以判断各个位的波宽信号来决定高低信号。位解码原理如下:
解码为0:低电平的宽度0.56ms+高电平的宽度0.56ms。
解码为1:低电平的宽度1.68ms+高电平的宽度0.56ms。
程序中必须设计一精确的0.1ms延时时间作为基础时间,以计数实际的波形宽度,若读值为5表示波形宽度为0.5ms,若读值为16表示波形宽度为1.6ms,以此类推。高电平的宽度1.12ms为固定,因此可以直接判断低电平的宽度的计数值5或时16,来确定编码为0或是1。程序中可以减法指令SUBB来完成判断,指令“SUBB A,R2”中若R2为计数值,A寄存器设为8,就可如下:
当“8-R2”有产生借位,借位标志C=1,表示编码为1。
当“8-R2”无产生借位,借位标志C=0,表示编码为0。
将借位标志C经过右移指令“RRC A”转入A寄存器中,再经由R0寄存器间接寻址存入内存中。
-err
- 2022-08-22 12:44:29下载
- 积分:1
-
数模转换器和模数转换器在单片机系统中的应用:AD转换器和DA转换器在MCS...
数模转换器和模数转换器在单片机系统中的应用:AD转换器和DA转换器在MCS-51系列单片机系统中的应用-DAC and ADC in Single Chip System: AD converters and DA converters in the MCS-51 Series Single Chip System
- 2022-02-01 04:59:10下载
- 积分:1
-
基于MSP430的I2C驱动程序,超强可移植性,方便重定义管脚
基于MSP430的I2C驱动程序,超强可移植性,方便重定义管脚-MSP430 Based on the I2C driver, super-portable, convenient re-definition of pin
- 2023-05-27 12:00:02下载
- 积分:1
-
使用AVR单片机I2C 24C02
用AVR的
I2C读写24C02
先在24C02中写入一段数据,然后断电,再送电,将EEPROM中的数据发送给PC机-24C02 using AVR I2C-read the first paragraph in the 24C02 to write data, and power outages, sending electricity, EEPROM data will be sent to the PC,
- 2023-05-30 15:20:03下载
- 积分:1
-
AVRHARDWARE DESIGN GUIDE
AVR硬件设计注意事项,需要在设计中注意-AVRHARDWARE DESIGN GUIDE
- 2022-05-08 22:36:36下载
- 积分:1