登录
首页 » 嵌入式系统 » usb 程序 usb通讯 仿真程序,飞利浦pidusb12

usb 程序 usb通讯 仿真程序,飞利浦pidusb12

于 2022-06-01 发布 文件大小:123.98 kB
0 161
下载积分: 2 下载次数: 1

代码说明:

usb 程序 usb通讯 仿真程序,飞利浦pidusb12-usb procedures usb communications simulation program, Philips pidusb12

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • 基于的LED控制程序,由C语言编写。
    基于嵌入式系统的LED控制程序,由C语言编写。-based Embedded System LED control procedures, prepared by the C language.
    2022-12-04 09:20:03下载
    积分:1
  • 浙江大学的悟空模拟器的安装程序及使用说明。WUKONG是从底层的CPU、硬件电路板开始模拟的开放源码的模拟器。...
    浙江大学的悟空嵌入式系统模拟器的安装程序及使用说明。WUKONG是从底层的CPU、硬件电路板开始模拟的开放源码的嵌入式系统模拟器。-Zhejiang University Wukong Embedded System Simulator installation procedures and use. WUKONG from the bottom of the CPU, hardware circuit board simulation of the beginning of open-source embedded system simulator.
    2022-10-07 18:50:07下载
    积分:1
  • keborad interfacing
    带8051的嵌入式键盘液晶显示器。非常好用
    2022-02-13 23:55:42下载
    积分:1
  • For the Linux driver under the touch screen, use the version in the 2.6.15 kerne...
    用于Linux下的触摸屏驱动,使用在2.6.15版本内核上,可以作为两种方式使用,运行可靠稳定。-For the Linux driver under the touch screen, use the version in the 2.6.15 kernel, it can be used as two ways, reliable operation and stability.
    2022-06-17 05:31:36下载
    积分:1
  • 安卓开发 百度地图
         在老师指导下编的源码,安卓百度地图的,功能还可以,查询公交路线,卫星定位等等等啦,需要从百度地图官网上注册一下,下载钥匙,匹配一下,然后就可以用了。可以运行的程序,起码在我自己电脑上跑的起来,希望对大家有用哈!
    2022-01-30 22:57:41下载
    积分:1
  • ucgui+linux移植过程
    把ucgui-3.90a移植到了Linux下,还是写个总结吧。。。        ucgui的可移植性很高,只需要做很少的改动就可以移植到各个平台,移植到Linux下也一样。 请点击左侧文件开始预览 !预览只提供20%的代码片段,完整代码需下载后查看 加载中 侵权举报
    2022-01-30 13:02:50下载
    积分:1
  • 19264液晶显示完整C程序
    19264液晶显示完整C程序-19,264 LCD integrity C Program
    2022-03-01 17:54:01下载
    积分:1
  • PIC16F73做逆变器,包括原理图,C程序,及相关信息
    PIC16f73做的逆变器,包括原理图,c程序,与相关资料-PIC16f73 done inverter, including schematics, c program, and related information
    2022-09-26 06:10:03下载
    积分:1
  • 汽车PKE工程 密钥转发器程序 通过车厂认证的哦
    The PCF7991AT is a fully integrated Advanced Basestation IC, ABIC, designed for car immobilizer systems providing read and write access to an identification transponder. The device is intended for use with the NXP transponder family (PCF79xx) as well as other transponder types operating at 125 kHz and employing ASK, Amplitude Shift Keying for write and AM/PM for the read operation. The receiver characteristics (amplifier gain,filter cutoff frequencies) can be optimized to system and transponder requirements. The PCF7991AT IC is designed for easy integration into immobilizer read/write and read-only systems featuring a high degree of integration and very low external component count. The device integrates a powerful antenna driver/modulator, a low-noise adaptive sampling time demodulator, programmable filters/amplifier and digitizer, required to design high-performance basestations. A three wire microcontroller interface is provided for programming the PCF7991AT as well as for th
    2023-01-18 14:55:03下载
    积分:1
  • ucosii移植基于LPC2148,六团
    基于LPC2148的UCOSII移植,带6个任务-UCOSII transplantation based on the LPC2148, with six mission
    2022-03-17 16:45:38下载
    积分:1
  • 696516资源总数
  • 106442会员总数
  • 11今日下载