登录
首页 » SCM » MSP430为MSP430串口GPS采用GPS接口程序…

MSP430为MSP430串口GPS采用GPS接口程序…

于 2022-06-15 发布 文件大小:41.22 kB
0 140
下载积分: 2 下载次数: 1

代码说明:

MSP430和GPS的接口程序,通过MSP430的串口接收GPS发出的数据-MSP430 and the GPS interface procedure for the adoption of the MSP430 serial GPS receiver data issued

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • 2051的时钟程序问题2051clk
    2051的时钟程序问题2051clk-2051 clock procedure 2051clk
    2023-02-05 13:20:03下载
    积分:1
  • MAX7219 LED驱动程序包括定义和测试程序显示功能
    max7219 led drive program 包括/功能函数定义和测试程序显示-max7219 led drive program includes/function definitions and test procedures show
    2022-08-03 02:06:44下载
    积分:1
  • LT_1B msp430开发板例子程序-TA_6
    LT_1B msp430开发板例子程序-TA_6
    2022-10-22 12:05:03下载
    积分:1
  • This is a microcontroller keyboard response procedures, mainly for the design of...
    这是一个单片机键盘响应程序,主要用于单片机设计中对键盘的编程,使得单片机能够显示键盘的按键-This is a microcontroller keyboard response procedures, mainly for the design of single-chip microcomputer keyboard programming, SCM makes the keyboard can display buttons
    2022-02-20 18:08:16下载
    积分:1
  • SPI是一个环形总线结构,由ss(cs)、sck、sdi、sdo构成,其时序其实很简单,主要是在sck的控制下,两个双向移位寄存器进行数据交换。 假设下面...
    SPI是一个环形总线结构,由ss(cs)、sck、sdi、sdo构成,其时序其实很简单,主要是在sck的控制下,两个双向移位寄存器进行数据交换。 假设下面的8位寄存器装的是待发送的数据10101010,上升沿发送、下降沿接收、高位先发送。 那么第一个上升沿来的时候 数据将会是sdo=1;寄存器=0101010x。下降沿到来的时候,sdi上的电平将所存到寄存器中去,那么这时寄存器=0101010sdi,这样在8个时钟脉冲以后,两个寄存器的内容互相交换一次。这样就完成里一个spi时序。 -SPI bus is a ring structure, by ss (cs), sck, sdi, sdo composition, its timing is actually very simple, mainly under the control of the sck and two bi-directional shift register for data exchange. Assuming the following 8-bit register is loaded to send the data to be 10,101,010, rising to send, receive falling edge, high first sent. Well, the first rising edge to the time data will be sdo = 1 register = 0101010x. Falling edge comes, sdi on the level will be stored to the register, then register at this time = 0101010sdi, so 8 clock pulse later, the contents of two registers to exchange time. This will be completed in a spi timing.
    2022-02-06 05:39:49下载
    积分:1
  • 源码公开的MCS 51 单片机的宏汇编器 Macro Assembler of MCS MCS
    源码公开的MCS 51 单片机的宏汇编器 Macro Assembler of MCS MCS-51 micro controller Version 0.12 这是一个应届生写的习作 尽管这个软件A51 还未完全达到满意的效果不过与Keil 公司的A51 配合起来使用还是不错的 公开源码和文档的目的是希望能够给一些爱好者作为学习编译原理和C 程序设计的靶子同时也希望有更多的热心人参与修改源码直至更加完善 来自周立功公司-MCS 51 open-source SCM macro assembler Macro Assembler of MCS MCS-51 micro controller Version 0.12 This is a year of Health to write assignments A51 even though the software is still not yet fully satisfactory, however the effect of the A51 and Keil company with up or a good use of open source code and documentation which aims to compile a number of enthusiasts as a learning theory and C programming target but also hope that more and more enthusiastic to participate in modified source code until a more complete company from weeks Ligong
    2022-02-02 21:21:33下载
    积分:1
  • 可控硅及其触发系统的文章具有一定的参考价值
    可控硅及其触发系统的文章具有一定的参考价值-SCR and its trigger system of the article has a certain reference value
    2022-07-21 01:38:08下载
    积分:1
  • 2022-02-06 10:23:14下载
    积分:1
  • 基于AD89S52的驱动12864液晶的源程序。
    基于AD89S52的驱动12864液晶的源程序。-On AD89S52 LCD source driver 12864.
    2022-04-07 00:24:02下载
    积分:1
  • 1总线通信协议应用实例 (C51编写的源程序,keil)
    1总线通信协议应用实例 (C51编写的源程序,keil)-a bus communication protocol application examples (C51 prepared by the source, c51)
    2022-04-06 13:29:04下载
    积分:1
  • 696516资源总数
  • 106409会员总数
  • 8今日下载