此代码是我精心调试而成，内有NOKIA3310驱动，无刷电机驱动，还有UCOS嵌入式操作系统，在电路板上调试成功-This code is from my well-debug, which have NOKIA3310 driver, brushless motor drive, there are uCOS embedded operating system, the success of the circuit board debugging

LPC2294 D12 ucos-II驱动(LPC2294 D12 For uCos-II)

smartarm2200开发板上，minigui消息处理实验源程序-smartarm2200 development board. Minigui experiments news source

在LPC2210平台，CAN通信协议在UC_OS操作系统中的实现代码；开发环境为ADS1.2-In the LPC2210 platform, CAN communication protocol in UC_OS the realization of the operating system code development environment for ADS1.2

lpc21xx（飞利浦的ARM）目标板特殊的代码，包括异常处理程序和目标板初始化程序 每个工程应当具有这个文件的拷贝，用户根据程序的需要修改本文件。(lpc21xx (Philips ARM) target board specific code, including exception handling procedures and target board initialization procedure for each project should have a copy of this document, the user according to the procedures of the need to modify the present document.)

UCOS2+ARM中I2C模块程序，稳定可靠，可以直接应用到产品中。-UCOS2+ ARM in the I2C module procedures, stable and reliable and can be directly applied to the products.

uc/os基于TI tms320dsp28312的移植-the transplant of the rtos-ucos for TI tms320dsp28312

在iar for stm8里移植了ucos ii 2.54版本，是上官金虹大侠的大作。(In iar for stm8 in transplant ucos ii 2.54 version, is the masterpiece Shangguanjinhong heroes.)

uCOS-II在51上的移植源码V1.1-uCOS-II at 51 on the transplant source V1.1

STM32F0系列的ucosii移植实例代码，基于Keil5，包括串口通信、按键检测、RTC时钟实时显示等(STM32F0 series of uCOSII transplantation example code, based on Keil5, including serial communication, key detection, RTC clock, real-time display)