-
在PXA270主板上,配置完基本的GPIO后,可以用本程序读写CF卡来测试CF插槽的硬件连线...
在PXA270主板上,配置完基本的GPIO后,可以用本程序读写CF卡来测试CF插槽的硬件连线-The motherboard in PXA270, finished basic GPIO configuration, you can use this program to read and write CF slot CF card to test the hardware connection
- 2022-08-05 09:29:25下载
- 积分:1
-
精确定时+中断+进制转换+移位+LED显示+按关键加速+EEPROM 存储测试...
精确定时+中断+进制转换+移位+LED显示+按关键加速+EEPROM 存储测试-Precise Timing+ Interrupted+ Hexadecimal conversion+ Shift+ LED display+ By key accelerate+ EEPROM memory test
- 2022-07-15 21:48:38下载
- 积分:1
-
嵌入式linux下tracerouter 功能实现源代码,需要QT运行库
嵌入式linux下tracerouter 功能实现源代码,需要QT运行库-Embedded linux realize under tracerouter function source code, need QT runtime
- 2022-03-14 04:50:50下载
- 积分:1
-
SD card read and write registers and data, debug the success of direct use.
读写SD卡寄存器和数据,调试成功,直接能用.-SD card read and write registers and data, debug the success of direct use.
- 2022-07-18 13:20:26下载
- 积分:1
-
AT91SAM7S256 + PCF8563 RTC + FATfs + 序列
AT91SAM7S64 256 RTC interfaced.fatfs 与 fatfs 的工作代码从陈 http://elm-chan.org/fsw/ff/00index_e.htmlRTC 使用一个例子是 PCF8563serial 用于在 PC 上的终端中显示 debuginformation
- 2023-04-27 03:05:04下载
- 积分:1
-
Arduino 使用 cc2500
收发信机的 CC2500 示例代码。这将会发送数据包中包含的长度和"你好"。每个 400ms,然后进入接收模式。改编自 https://github.com/yasiralijaved/Arduino-CC2500-Library ,Zohan写的,onZohan@gmail.com。
- 2022-07-14 23:19:07下载
- 积分:1
-
S3C2410A的实时时钟的设计实验源程序
S3C2410A的实时时钟的设计实验源程序-S3C2410A the experimental design of real-time clock source
- 2023-06-28 15:40:03下载
- 积分:1
-
DHT11温湿度模块采集温度、湿度
单片机采用C8051F310,作为一个采集节点,DHT11温湿度模块采集温度、湿度,上位机(轮询方式)通过RS485总线发送采集命令。
- 2022-07-07 05:25:22下载
- 积分:1
-
嵌入式的开发和建立
嵌入式的开发和建立-embedded in the development and establishment
- 2022-04-16 20:50:26下载
- 积分:1
-
WINHEX11V2 显示磁盘及文件信息
WINHEX11V2 显示磁盘及文件信息-WINHEX11V2- show disk and file information
- 2022-08-26 15:03:28下载
- 积分:1